产品中心您的位置：网站首页 > 产品中心 > > 泵 > BRINKMANNKTF52/300-051X+127泵

KTF52/300-051X+127泵

更新时间：2016-12-17

访问量：988

厂商性质：其他

生产地址：德国

简要描述：

BRINKMANNKTF52/300-051X+127泵

手机：
:
：

在线询价联系我们

产品介绍：

品牌	MOTOVARIO

BRINKMANN KTF52/300-051X+127泵

手机：
:
：

KAESER 6.3461.0/H1 滤芯

HGT140BEK HGT140SK 6 5,821 No Charge Standard 214

407 Call Factory Call Factory
HGT160BEK HGT160SK 6 6,647 No Charge Standard 263

407 Call Factory Call Factory
HGT180BEK HGT180SK 6 7,532 No Charge Standard 263

407 Call Factory Call FactoryKAESER 6.3461.0/H1 滤芯
Hot Gas Defrost Models & Options
BRINKMANN KTF52/300-051X+127泵When Do You Choose a
Configurable Model
Choose when there is not a standard model listed

or you want
to add factory-installed options.
When ordering a configurable model, remember to

KAESER 6.3461.0/H1 滤芯specify the
voltage and fan motor type.
Federal Regulation Requires EC Motors!
Energy Independence and Security Act of 2007 (H.R.

KAESER 6.3461.0/H1 滤芯6)
Walk-Ins manufactured on or after 01/01/2009 and

under 3,000 square feet
in area with single phase evaporator fan motors

less than 1 HP and less than
460V must be EC motors
Notes:
Adjustable Defrost Term. / Fan Delay is standard.
When using hot gas defrost units on 0°F degree

applications and below,
an insulated drain pan is required for models with

hot gas drain pans.
TXV = Expansion Valve
PSC-TE Fan Motors, Stainless Steel Cabinet & Pan,

and Copper Fin Coils
are available. Contact your Sales Representative or

Account Engineer
for more information.
28
Section 1KAESER 6.3461.0/H1 滤芯
Low Profile
Walk-In Unit Coolers
List Prices Effective February 15th, 2016. Prices

and specifications subject to change without

notice. Rev. 02/16
Bohn
Standard
Model
Bohn
Configurable
BRINKMANN Model
FPI
List
Price
($US)
Factory-Installed Options List Price Adders ($US)
Drain Pan Options Mechanical
Options Coil Options
Electric Hot Gas
Loop Insulated TXV ElectroFin
Coil Bronz-Glow
HGT200BEK HGT200SK 6 8,002 No Charge Standard 289

407 Call Factory Call Factory
HGT240BEK HGT240SK 6 9,588 No Charge Standard 329

768 Call Factory Call Factory
HGT280BEK HGT280SK 6 10,864 No Charge Standard 329

768 Call Factory Call Factory
HGT041BEK HGT041SK 4 2,362 No Charge Standard 126

407 Call Factory Call Factory
HGT068BEK HGT068SK 4 3,935 No Charge Standard 173

407 Call Factory Call Factory
HGT080BEK HGT080SK 4 4,175 No Charge Standard 173

407 Call Factory Call Factory
HGT102BEK HGT102SK 4 5,045 No Charge Standard 214

407 Call Factory Call Factory
HGT136BEK HGT136SK 4 6,580 No Charge Standard 263

407 Call Factory Call Factory
HGT170BEK HGT170SK 4 8,130 No Charge Standard 289

407 Call Factory Call Factory
HGT204BEK HGT204SK 4 9,519 No Charge Standard 329

768 Call Factory Call Factory
HGT235BEK HGT235SK 4 10,766 No Charge Standard 329

768 Call Factory Call Factory
Hot Gas Defrost Models with PSC Motors - 115/1/60
HGT035AK HGT035SK 6 1,882 No Charge Standard 126

407 Call Factory Call Factory
HGT040AK HGT040SK 6 2,038 No Charge Standard 126

407 Call Factory Call Factory
HGT047AK HGT047SK 6 2,362 No Charge Standard 126

407 Call Factory Call Factory
HGT065AK HGT065SK 6 2,657 No Charge Standard 173

407 Call Factory Call Factory
HGT075AK HGT075SK 6 2,973 No Charge Standard 173

407 Call Factory Call Factory
HGT090AK HGT090SK 6 3,311 No Charge Standard 173

407 Call Factory Call Factory
HGT120AK HGT120SK 6 3,834 No Charge Standard 214

407 Call Factory Call Factory
HGT140AK HGT140SK 6 4,624 No Charge Standard 214

407 Call Factory Call Factory
HGT160AK HGT160SK 6 4,924 No Charge Standard 263

407 Call Factory Call Factory
HGT180AK HGT180SK 6 5,685 No Charge Standard 263

407 Call Factory Call Factory
HGT200AK HGT200SK 6 5,873 No Charge Standard 289

407 Call Factory Call Factory
HGT240AK HGT240SK 6 6,936 No Charge Standard 329

768 Call Factory Call Factory
HGT280AK HGT280SK 6 8,081 No Charge Standard 329

768 Call Factory Call Factory
HGT041AK HGT041SK 4 1,973 No Charge Standard 126

407 Call Factory Call Factory
HGT068AK HGT068SK 4 3,173 No Charge Standard 173

407 Call Factory Call Factory
HGT080AK HGT080SK 4 3,396 No Charge Standard 173

407 Call Factory Call Factory
HGT102AK HGT102SK 4 3,747 No Charge Standard 214

407 Call Factory Call Factory
HGT136AK HGT136SK 4 4,867 No Charge Standard 263

407 Call Factory Call Factory
HGT170AK HGT170SK 4 5,997 No Charge Standard 289

407 Call Factory Call Factory
HGT204AK HGT204SK 4 6,973 No Charge Standard 329

768 Call Factory Call Factory
HGT235AK HGT235SK 4 8,100 No Charge Standard 329

768 Call Factory Call Factory
When Do You Choose a
Configurable Model
Choose when there is not a standard model listed

or you want
to add factory-installed options.
When ordering a configurable model, remember to

specify the
voltage and fan motor type.
Hot Gas Defrost Models & Options
Federal Regulation Requires EC Motors!
Energy Independence and Security Act of 2007 (H.R.

6)
Walk-Ins manufactured on or after 01/01/2009 and

under 3,000 square feet
in area with single phase evaporator fan motors

less than 1 HP and less than
460V must be EC motors
Notes:
Adjustable Defrost Term. / Fan Delay is standard.
When using hot gas defrost units on 0°F degree

applications and below,
an insulated drain pan is required for models with

hot gas drain pans.
TXV = Expansion Valve
PSC-TE Fan Motors, Stainless Steel Cabinet & Pan,

and Copper Fin Coils
are available. Contact your Sales Representative or

Account Engineer
for more information.
29
Section 5 Section 1
Walk-In Unit Coolers
Low Profile
Rev. 02/16 List Prices Effective February 15th,

2016. Prices and specifications subject to change

without notice.
Bohn
Standard
Model
Bohn
Configurable
Model
FPI
List
Price
($US)
Factory-Installed Options List Price Adders ($US)
Drain Pan Options Mechanical
Options Coil Options
Electric Hot Gas
Loop Insulated TXV ElectroFin
Coil Bronz-Glow
Hot Gas Defrost Models with PSC Motors - 208-

230/1/60
HGT035BK HGT035SK 6 1,932 No Charge Standard 126

407 Call Factory Call Factory
HGT040BK HGT040SK 6 2,096 No Charge Standard 126

407 Call Factory Call Factory
HGT047BK HGT047SK 6 2,427 No Charge Standard 126

407 Call Factory Call Factory
HGT065BK HGT065SK 6 2,870 No Charge Standard 173

407 Call Factory Call Factory
HGT075BK HGT075SK 6 3,185 No Charge Standard 173

407 Call Factory Call Factory
HGT090BK HGT090SK 6 3,575 No Charge Standard 173

407 Call Factory Call Factory
HGT120BK HGT120SK 6 4,140 No Charge Standard 214

407 Call Factory Call Factory
HGT140BK HGT140SK 6 4,825 No Charge Standard 214

407 Call Factory Call Factory
HGT160BK HGT160SK 6 5,319 No Charge Standard 263

407 Call Factory Call Factory
HGT180BK HGT180SK 6 6,204 No Charge Standard 263

407 Call Factory Call Factory
HGT200BK HGT200SK 6 6,342 No Charge Standard 289

407 Call Factory Call Factory
HGT240BK HGT240SK 6 7,596 No Charge Standard 329

768 Call Factory Call Factory
HGT280BK HGT280SK 6 8,872 No Charge Standard 329

768 Call Factory Call Factory
HGT041BK HGT041SK 4 2,030 No Charge Standard 126

407 Call Factory Call Factory
HGT068BK HGT068SK 4 3,271 No Charge Standard 173

407 Call Factory Call Factory
HGT080BK HGT080SK 4 3,511 No Charge Standard 173

407 Call Factory Call Factory
HGT102BK HGT102SK 4 4,049 No Charge Standard 214

407 Call Factory Call Factory
HGT136BK HGT136SK 4 5,252 No Charge Standard 263

407 Call Factory Call Factory
HGT170BK HGT170SK 4 6,470 No Charge Standard 289

407 Call Factory Call Factory
HGT204BK HGT204SK 4 7,527 No Charge Standard 329

768 Call Factory Call Factory
HGT235BK HGT235SK 4 8,774 No Charge Standard 329

768 Call Factory Call Factory
Hot Gas Defrost Models with PSC Motors - 460/1/60
- HGT035SK 6 2,099 No Charge Standard 126 407 Call

Factory Call Factory
- HGT040SK 6 2,261 No Charge Standard 126 407 Call

Factory Call Factory
- HGT047SK 6 2,596 No Charge Standard 126 407 Call

Factory Call Factory
- HGT065SK 6 3,204 No Charge Standard 173 407 Call

Factory Call Factory
- HGT075SK 6 3,518 No Charge Standard 173 407 Call

Factory Call Factory
- HGT090SK 6 3,911 No Charge Standard 173 407 Call

Factory Call Factory
- HGT120SK 6 4,639 No Charge Standard 214 407 Call

Factory Call Factory
- HGT140SK 6 5,325 No Charge Standard 214 407 Call

Factory Call Factory
- HGT160SK 6 5,992 No Charge Standard 263 407 Call

Factory Call Factory
- HGT180SK 6 6,873 No Charge Standard 263 407 Call

Factory Call Factory
When Do You Choose a
Configurable Model
Choose when there is not a standard model listed

or you want
to add factory-installed options.
When ordering a configurable model, remember to

specify the
voltage and fan motor type.
Hot Gas Defrost Models & Options
Federal Regulation Requires EC Motors!
Energy Independence and Security Act of 2007 (H.R.

6)
Walk-Ins manufactured on or after 01/01/2009 and

under 3,000 square feet
in area with single phase evaporator fan motors

less than 1 HP and less than
460V must be EC motors
Notes:
Adjustable Defrost Term. / Fan Delay is standard.
When using hot gas defrost units on 0°F degree

applications and below,
an insulated drain pan is required for models with

hot gas drain pans.
TXV = Expansion Valve
PSC-TE Fan Motors, Stainless Steel Cabinet & Pan,

and Copper Fin Coils
are available. Contact your Sales Representative or

Account Engineer
for more information.
30
Section 1
Low Profile
Walk-In Unit Coolers
List Prices Effective February 15th, 2016. Prices

and specifications subject to change without

notice. Rev. 02/16
Bohn
Standard
Model
Bohn
Configurable
Model
FPI
List
Price
($US)
Factory-Installed Options List Price Adders ($US)
Drain Pan Options Mechanical
Options Coil Options
Electric Hot Gas
Loop Insulated TXV ElectroFin
Coil Bronz-Glow
- HGT200SK 6 7,179 No Charge Standard 289 407 Call

Factory Call Factory
- HGT240SK 6 8,605 No Charge Standard 329 768 Call

Factory Call Factory
- HGT280SK 6 9,881 No Charge Standard 329 768 Call

Factory Call Factory
- HGT041SK 4 2,159 No Charge Standard 126 407 Call

Factory Call Factory
- HGT068SK 4 3,523 No Charge Standard 173 407 Call

Factory Call Factory
- HGT080SK 4 3,761 No Charge Standard 173 407 Call

Factory Call Factory
- HGT102SK 4 4,427 No Charge Standard 214 407 Call

Factory Call Factory
- HGT136SK 4 5,750 No Charge Standard 263 407 Call

Factory Call Factory
- HGT170SK 4 7,097 No Charge Standard 289 407 Call

Factory Call Factory
- HGT204SK 4 8,277 No Charge Standard 329 768 Call

Factory Call Factory
- HGT235SK 4 9,523 No Charge Standard 329 768 Call

Factory Call Factory
When Do You Choose a
Configurable Model
Choose when there is not a standard model listed

or you want
to add factory-installed options.
When ordering a configurable model, remember to

specify the
voltage and fan motor type.
Hot Gas Defrost Models & Options
Federal Regulation Requires EC Motors!
Energy Independence and Security Act of 2007 (H.R.

6)
Walk-Ins manufactured on or after 01/01/2009 and

under 3,000 square feet
in area with single phase evaporator fan motors

less than 1 HP and less than
460V must be EC motors
Notes:
Adjustable Defrost Term. / Fan Delay is standard.
When using hot gas defrost units on 0°F degree

applications and below,
an insulated drain pan is required for models with

hot gas drain pans.
TXV = Expansion Valve
PSC-TE Fan Motors, Stainless Steel Cabinet & Pan,

and Copper Fin Coils
are available. Contact your Sales Representative or

Account Engineer
for more information.
31
Section 5 Section 1
Walk-In Unit Coolers
Low Profile
Rev. 02/16 List Prices Effective February 15th,

2016. Prices and specifications subject to change

without notice.
Suction Line Check Valve Kit
Factory-Installed Shipped-Loose
Option Code
List Price
Adder
($US)
Part
Number
List Price
($US)
SLCV.CV-1 857 50169604 242
SLCV.CV-2 857 50169605 242
SLCV.CV-3 857 50169606 242
Drain Pan Loop Check Valve Kit
Factory-Installed Shipped-Loose
Option
Code
List Price
Adder
($US)
Part
Number
List Price
($US)
DPLC.CV-1 777 50169304 152
DPLC.CV-2 777 50169305 152
DPLC.CV-3 777 50169306 152
Shipped-Loose List
Price
($US)
Type EG Type HFESC Type SQE/SBF
Part Number Part Number Part Number
50169213 50169216 50169210 163
50169214 50169217 50169211 163
50169215 50169218 50169212 163
Factory-Installed List Price
Adder
($US)
Type EG Type HFESC Type SQE/SBF
Option Code Option Code Option Code
RCBP.EG-1 RCBP.HF-1 RCBP.SQ-1 1,141
RCBP.EG-2 RCBP.HF-2 RCBP.SQ-2 1,141
RCBP.EG-3 RCBP.HF-3 RCBP.SQ-3 1,141
Hot Gas Reverse Cycle Kits
Need a Hot Gas
Reverse Cycle Kit
Selection Instructions:
TXV Bypass Assembly Kits
Notes:
Factory-Installed Kits include the TXV price.

Customer must specify valve model, refrigerant and

SST on order.
Shipped-Loose Kits do NOT include the TXV price.
Bohn Hot Gas
Models
6 FPI 4 FPI
035 - 065 041
075 - 140 068 - 102
160 - 280 136 - 235
Check Valve Kits
Only available for models with the standard hot gas

loop drain pan.
Notes:
It is recommended that the customer order both

check valve kits.
Shipped-Loose Kits do NOT include the valve

prices.
The drain pan check valve kit can be ordered as

an independent item, but the suction-line check

valve kit must be ordered with the drain pan check

valve kit
Use the instructions below to help select the

appropriate kit. Still
need help Please contact your local Sales

Representative or Account
Engineer for assistance.
1. Decide if kits are to be shipped-loose or

factory-installed.
2. Select the correct TXV bypass kit based on unit

model number and TXV style. Selections for units

with the electric drain pan option are
finished. For units with the standard hot gas drain

pan, please proceed with instructions 3 and 4.
3. Select the appropriate drain pan and suction-

line check valve kits based on unit model number.

Drain pan and suction-line check valves
and piping can be supplied by others but are

necessary to complete the piping.
4. If room temperature is 0°F or below, please

select an insulated drain pan as a factory-

installed option. Selection for hot gas pan unit is
finished.
When placing an order, please specify:
Unit model number
Drain pan type (hot gas or electric). If ordering

hot gas pan, indicate whether unit is to have

insulated pan.
Reverse cycle kit option codes or part numbers.

If ordering factory-mounted kits, please specify

TXV style, refrigerant, saturated suction
temperature (SST) and liquid temperature.
in order to complete the piping
Bohn Hot Gas
Models
6 FPI 4 FPI
035 - 075 041 - 080
090 - 160 102 - 204
180 - 280 235
32
Section 1
Low Profile
Walk-In Unit Coolers
List Prices Effective February 15th, 2016. Prices

and specifications subject to change without

notice. Rev. 02/16
Drain Pan Loop Check Valve Kit
Factory-Installed Shipped - Loose
Option
Code
List Price
Adder
($US)
Part
Number
List Price
($US)
PIPCV.CV-1 777 50169504 147
PIPCV.CV-2 777 50169505 147
PIPCV.CV-3 777 50169506 147
Shipped-Loose List
Price
($US)
Type EG Type HFESC Type SQE/SBF
Part Number Part Number Part Number
50169413 50169416 50169410 119
50169414 50169417 50169411 119
50169415 50169418 50169412 119
Factory-Installed List Price
Adder
($US)
Type EG Type HFESC Type SQE/SBF
Option Code Option Code Option Code
PIP.EG-1 PIP.HF-1 PIP.SQ-1 1,093
PIP.EG-2 PIP.HF-2 PIP.SQ-2 1,093
PIP.EG-3 PIP.HF-3 PIP.SQ-3 1,093
Hot Gas 3-Pipe Kits
Need a Hot Gas 3-Pipe
Kit
Selection Instructions:
Use the instructions below to help select the

appropriate kit. Still
need help Please contact your local Sales

Representative or Account
Engineer for assistance.
1. Decide if kits are to be shipped-loose or

factory-installed.
2. Select the appropriate 3-pipe kits based on unit

model number. Drain pan loop check valve and piping

can be supplied by others but are
necessary to complete the piping.
3. If room temperature is 0°F or below, please

select an insulated drain pan as a factory-

installed option. Selection for hot gas pan unit is
finished.
When placing an order, please specify:
Unit model number
Drain pan type (hot gas or electric). If ordering

hot gas pan, indicate whether unit is to have

insulated pan.
3-Pipe kit option codes or part numbers. If

ordering factory-mounted kits, please specify TXV

style, refrigerant, saturated suction
temperature (SST) and liquid temperature.
TXV Bypass Assembly Kits
Notes:
Factory-Installed Kits include the TXV price.

Customer must specify valve model, refrigerant and

SST on order.
Shipped-Loose Kits do NOT include the TXV price.
Bohn Hot Gas
Models
6 FPI 4 FPI
035 - 075 041 - 080
090 - 160 102 - 204
180 - 280 235
Check Valve Kits
Only available for models with the standard hot gas

loop drain pan.
Notes:
Shipped-Loose Kits do NOT include the valve

prices.
Bohn Hot Gas
Models
6 FPI 4 FPI
035 - 065 041
075 - 140 068 - 102
160 - 280 136 - 235
33
Section 5 Section 1
Walk-In Unit Coolers
Low Profile
Rev. 02/16 List Prices Effective February 15th,

2016. Prices and specifications subject to change

without notice.
Shipped-Loose Accessories
A wide range of shipped-loose accessories are

available to order. Can’t Find Something or need

help selecting the appropriate accessory
for your unit Please contact your local Sales

Representative or Account Engineer for assistance.
Expansion Valves (TXV)
When placing order, please specify refrigerant

type, saturated suction
temperature (SST), liquid temperature, and room

and under
4502Z 317 3/8 12,000 BTUH to 24,000 BTUH 11,000

BTUH to 21,000 BTUH
29318011 342 3/8 24,000 BTUH to 44,000 BTUH 21,000

BTUH to 38,000 BTUH
29318012 342 1/2 36,000 BTUH to 51,000 BTUH 31,000

BTUH to 44,000 BTUH
Part Number Description List Price
($US) Notes
Room Thermostats
2891040 Room Thermostat 286 -
28963101 Electronic Room Thermostat 361 -
Defrost Controls
4267W Adjustable Defrost Control / Fan Delay Switch

267 -
21340101 Defrost Timer (60 Hz) 334 -
5505-R 30-Amp Contactor 358 Use as fan or heater

contactor
Check Valves
4146T 5/8" Suction Line Check Valve 96 -
5890C 7/8" Suction Line Check Valve 201 -
5889C 1 1/8" Suction Line Check Valve 391 -
2933022 1 3/8" Suction Line Check Valve 807 -
Drain Line Heaters
5508Q 6 ft. Drain Line heater (208-230V, 42 Watts)

145 -
5594P 12 ft. Drain Line heater (208-230V, 84 Watts)

158 -
5595P 18 ft. Drain Line heater (208-230V, 126

Watts) 187 -
5596P 36 ft. Drain Line heater (208-230V, 252

Watts) 287 -
5597P 60 ft. Drain Line heater (208-230V, 420

Watts) 529 -
Heat Exchangers
24200004 Heat Exchanger used on 035 - 047 (6FPI)

and 041 - 068 (4FPI)
Electric & Hot Gas Defrost Models 237 3/8" Liquid

Connection OD, 5/8" Suction Connecction OD,
14" Length, 2lbs Approx. Ship Wt.
24200005 Heat Exchanger used on 065 - 094 (6FPI)

and 080 - 105 (4FPI)
Electric & Hot Gas Defrost Models 260 3/8" Liquid

Connection OD, 7/8" Suction Connecction OD,
14" Length, 2lbs Approx. Ship Wt.
24200006 Heat Exchanger used on 120 - 140 (6FPI)

and 136 - 139 (4FPI)
Electric & Hot Gas Defrost Models 280 1/2" Liquid

Connection OD, 7/8" Suction Connecction OD,
11" Length, 2lbs Approx. Ship Wt.
24200007 Heat Exchanger used on 160 - 180 (6FPI)

and 170 - 174 (4FPI)
Electric & Hot Gas Defrost Models 304 1/2" Liquid

Connection OD, 1-1/8"" Suction Connecction
OD, 14" Length, 2lbs Approx. Ship Wt.
24200008 Heat Exchanger used on 200 - 280 (6FPI)

and 204 - 235 (4FPI)
Electric & Hot Gas Defrost Models 510 5/8" Liquid

Connection OD, 1-3/8"" Suction Connecction
OD, 14" Length, 3lbs Approx. Ship Wt.
34
Section 1
Walk-In Unit Coolers
Low Flow
List Prices Effective February 15th, 2016. Prices

and specifications subject to change without

notice. Rev. 02/16
Low Flow
Product Description
Low Flow unit coolers, available in air, electric,

and hot
gas defrost, are ideal for meat storage and

preparation
rooms, floral coolers, dough retarding and many

other
applications requiring low air velocities and low

sound
levels. With low velocity unit coolers, high

humidities
can be maintained to prevent product drying and
weight loss. These units are ideal for any type of
workroom where human comfort is important. Opting
for EC motors makes this product qualified to be
included in the E Solutions product portfolio

because
of increased energy efficiency and cost savings.
Standard Features
Ease of Installation & Service
All factory installed electrical components are

wired to a terminal board in the
junction box making field wiring quick and easy
Access port on the suction connection allows

superheat to be easily and
accuray set
Motors are factory-wired to unit junction box for

fast installation
Reliable & Durable
Rust-free, all-aluminum white case with louvered

intake grille for attractive
appearance
Sweat-type cooling coil connections reduce the

potential for leaks
Nickel-steel alloy heaters provide a positive

defrost and have long life
Hot gas models use inner drain pans with low-

wattage electric heaters. This
eliminates the braze joints and tubing associated

with hot gas drain pan loops
Performance
Statically and dynamically balanced fans are

designed for quiet air movement
Electric defrost coils have a hermetically sealed

defrost termination thermostat
that does not require adjustment. Hot gas defrost

units are available with an
optional adjustable defrost termination thermostat

(shipped-loose accessory).
Cross-fin cooling coils with corrugated aluminum

fins spaced 6 FPI & 3/8"
OD staggered copper tubes provide optimum heat

transfer and reduce the
amount of refrigerant required
Generous coil surface helps to maintain steady

room temperature and
minimize product shrinkage
All models use inner drain pans to reduce

sweating
Thermal overload protected motors are resiliently

mounted inside the unit to
assure minimum noise level
Versatile
Inlet connection allows for external mounting of

TXV
Overview
Certifications
Nomenclature
35
Section 5 Section 1
Walk-In Unit Coolers
Low Flow
Rev. 02/16 List Prices Effective February 15th,

2016. Prices and specifications subject to change

without notice.
Air Defrost Models & Options
Bohn
Standard
Model
Bohn
Configurable
Model
List
Price
($US)
Factory-Installed Options List Price Adders ($US)
Coil Options
ElectroFin
Coil
BohnGuard Fin
Protection Bronz-Glow
Air Defrost Models with EC Motors - 115/1/60
- LO070SE 5,382 Call Factory 2,067 Call Factory
- LO087SE 5,635 Call Factory 2,067 Call Factory
- LO118SE 6,638 Call Factory 2,067 Call Factory
- LO125SE 7,044 Call Factory 2,067 Call Factory
- LO150SE 7,444 Call Factory 2,067 Call Factory
- LO165SE 8,212 Call Factory 2,067 Call Factory
- LO189SE 8,985 Call Factory 2,502 Call Factory
- LO225SE 9,719 Call Factory 2,502 Call Factory
- LO266SE 10,461 Call Factory 2,502 Call Factory
Air Defrost Models with EC Motors - 208-230/1/60
- LO070SE 5,554 Call Factory 2,067 Call Factory
- LO087SE 5,802 Call Factory 2,067 Call Factory
- LO118SE 6,805 Call Factory 2,067 Call Factory
- LO125SE 7,214 Call Factory 2,067 Call Factory
- LO150SE 7,621 Call Factory 2,067 Call Factory
- LO165SE 8,383 Call Factory 2,067 Call Factory
- LO189SE 9,148 Call Factory 2,502 Call Factory
- LO225SE 9,888 Call Factory 2,502 Call Factory
- LO266SE 10,628 Call Factory 2,502 Call Factory
Air Defrost Models with PSC Motors - 115/1/60
- LO070SE 4,604 Call Factory 2,067 Call Factory
- LO087SE 4,857 Call Factory 2,067 Call Factory
- LO118SE 5,860 Call Factory 2,067 Call Factory
- LO125SE 6,266 Call Factory 2,067 Call Factory
- LO150SE 6,666 Call Factory 2,067 Call Factory
- LO165SE 7,434 Call Factory 2,067 Call Factory
LO189AE LO189SE 7,859 Call Factory 2,502 Call

Factory
LO225AE LO225SE 8,593 Call Factory 2,502 Call

Factory
LO266AE LO266SE 9,335 Call Factory 2,502 Call

Factory
When Do You Choose a
Configurable Model
Choose when there is not a standard model listed

or you want to
add factory-installed options.
When ordering a configurable model, remember to

specify the
voltage and fan motor type.
Federal Regulation Requires EC Motors!
Energy Independence and Security Act of 2007 (H.R.

6)
Walk-Ins manufactured on or after 01/01/2009 and

under 3,000 square feet
in area with single phase evaporator fan motors

less than 1 HP and less than
460V must be EC motors.
Notes:
Copper Fin Coils are available. Contact your

Sales Representative or Account
Engineer for more information.
36
Section 1
Walk-In Unit Coolers
Low Flow
List Prices Effective February 15th, 2016. Prices

and specifications subject to change without

notice. Rev. 02/16
Federal Regulation Requires EC Motors!
Energy Independence and Security Act of 2007 (H.R.

6)
Walk-Ins manufactured on or after 01/01/2009 and

under 3,000 square feet
in area with single phase evaporator fan motors

less than 1 HP and less than
460V must be EC motors.
Air Defrost Models & Options
Bohn
Standard
Model
Bohn
Configurable
Model
List
Price
($US)
Factory-Installed Options List Price Adders ($US)
Coil Options
ElectroFin
Coil
BohnGuard Fin
Protection Bronz-Glow
Air Defrost Models with PSC Motors - 208-230/1/60
- LO070SE 4,776 Call Factory 2,067 Call Factory
- LO087SE 5,024 Call Factory 2,067 Call Factory
- LO118SE 6,027 Call Factory 2,067 Call Factory
- LO125SE 6,436 Call Factory 2,067 Call Factory
- LO150SE 6,843 Call Factory 2,067 Call Factory
- LO165SE 7,605 Call Factory 2,067 Call Factory
LO189BE LO189SE 8,023 Call Factory 2,502 Call

Factory
LO225BE LO225SE 8,762 Call Factory 2,502 Call

Factory
LO266BE LO266SE 9,502 Call Factory 2,502 Call

Factory
Air Defrost Models with Shaded Pole Motors -

115/1/60
LO070AE LO070SE 4,256 Call Factory 2,067 Call

Factory
LO087AE LO087SE 4,509 Call Factory 2,067 Call

Factory
LO118AE LO118SE 5,512 Call Factory 2,067 Call

Factory
LO125AE LO125SE 5,918 Call Factory 2,067 Call

Factory
LO150AE LO150SE 6,318 Call Factory 2,067 Call

Factory
LO165AE LO165SE 7,086 Call Factory 2,067 Call

Factory
Air Defrost Models with Shaded Pole Motors - 208-

230/1/60
LO070BE LO070SE 4,428 Call Factory 2,067 Call

Factory
LO087BE LO087SE 4,676 Call Factory 2,067 Call

Factory
LO118BE LO118SE 5,679 Call Factory 2,067 Call

Factory
LO125BE LO125SE 6,088 Call Factory 2,067 Call

Factory
LO150BE LO150SE 6,495 Call Factory 2,067 Call

Factory
LO165BE LO165SE 7,257 Call Factory 2,067 Call

Factory
When Do You Choose a
Configurable Model
Choose when there is not a standard model listed

or you want to
add factory-installed options.
When ordering a configurable model, remember to

specify the
voltage and fan motor type.
Notes:
Copper Fin Coils are available. Contact your

Sales Representative or Account
Engineer for more information.
37
Section 5 Section 1
Walk-In Unit Coolers
Low Flow
Rev. 02/16 List Prices Effective February 15th,

2016. Prices and specifications subject to change

without notice.
Electric Defrost Models & Options
When Do You Choose a
Configurable Model
Bohn
Standard
Model
Bohn
Configurable
Model
List
Price
($US)
Factory-Installed Options List Price Adders ($US)
Electrical Options Coil Options
Fixed Defrost Term.
Thermostat Bronz-Glow
Electric Defrost Models with EC Motors - 208-

230/1/60
- LOD070SE 5,871 Standard Call Factory
- LOD087SE 6,516 Standard Call Factory
- LOD118SE 8,029 Standard Call Factory
- LOD125SE 8,244 Standard Call Factory
- LOD150SE 8,430 Standard Call Factory
- LOD165SE 9,735 Standard Call Factory
- LOD189SE 10,184 Standard Call Factory
- LOD225SE 11,311 Standard Call Factory
- LOD266SE 11,899 Standard Call Factory
Electric Defrost Models with PSC Motors - 208-

230/1/60
- LOD070SE 5,093 Standard Call Factory
- LOD087SE 5,738 Standard Call Factory
- LOD118SE 7,251 Standard Call Factory
- LOD125SE 7,466 Standard Call Factory
- LOD150SE 7,652 Standard Call Factory
- LOD165SE 8,957 Standard Call Factory
LOD189BE LOD189SE 9,057 Standard Call Factory
LOD225BE LOD225SE 10,186 Standard Call Factory
LOD266BE LOD266SE 10,772 Standard Call Factory
Electric Defrost Models with Shaded Pole Motors -

208-230/1/60
LOD070BE LOD070SE 4,745 Standard Call Factory
LOD087BE LOD087SE 5,390 Standard Call Factory
LOD118BE LOD118SE 6,903 Standard Call Factory
LOD125BE LOD125SE 7,118 Standard Call Factory
LOD150BE LOD150SE 7,304 Standard Call Factory
LOD165BE LOD165SE 8,609 Standard Call Factory
Choose when there is not a standard model listed

or you want to
add factory-installed options.
When ordering a configurable model, remember to

specify the
voltage and fan motor type.
Federal Regulation Requires EC Motors!
Energy Independence and Security Act of 2007 (H.R.

6)
Walk-Ins manufactured on or after 01/01/2009 and

under 3,000 square feet
in area with single phase evaporator fan motors

less than 1 HP and less than
460V must be EC motors.
Notes:
Electric Drain Pan is standard on electric

defrost models.
Copper Fin Coils are available. Contact your

Sales Representative or Account
Engineer for more information.
38
Section 1
Walk-In Unit Coolers
Low Flow
List Prices Effective February 15th, 2016. Prices

and specifications subject to change without

notice. Rev. 02/16
Hot Gas Defrost Models & Options
Bohn
Standard
Model
Bohn
Configurable
Model
List
Price
($US)
Factory-Installed Options List
Price Adders ($US)
Coil Options
Bronz-Glow
Hot Gas Defrost Models with EC Motors - 115/1/60
- LOG070SE 5,773 Call Factory
- LOG087SE 6,415 Call Factory
- LOG118SE 7,926 Call Factory
- LOG125SE 8,140 Call Factory
- LOG150SE 8,333 Call Factory
- LOG165SE 9,628 Call Factory
- LOG189SE 10,081 Call Factory
- LOG225SE 11,208 Call Factory
- LOG266SE 11,796 Call Factory
Hot Gas Defrost Models with EC Motors - 208-

230/1/60
- LOG070SE 5,943 Call Factory
- LOG087SE 6,583 Call Factory
- LOG118SE 8,094 Call Factory
- LOG125SE 8,308 Call Factory
- LOG150SE 8,500 Call Factory
- LOG165SE 9,804 Call Factory
- LOG189SE 10,250 Call Factory
- LOG225SE 11,380 Call Factory
- LOG266SE 11,968 Call Factory
Hot Gas Defrost Models with PSC Motors - 115/1/60
- LOG070SE 4,995 Call Factory
- LOG087SE 5,637 Call Factory
- LOG118SE 7,148 Call Factory
- LOG125SE 7,362 Call Factory
- LOG150SE 7,555 Call Factory
- LOG165SE 8,850 Call Factory
LOG189AE LOG189SE 8,954 Call Factory
LOG225AE LOG225SE 10,083 Call Factory
LOG266AE LOG266SE 10,669 Call Factory
Notes:
Electric Drain Pan is standard on hot gas defrost

models. Federal Regulation Requires EC Motors!
Energy Independence and Security Act of 2007 (H.R.

6)
Walk-Ins manufactured on or after 01/01/2009 and

under 3,000 square feet
in area with single phase evaporator fan motors

less than 1 HP and less than
460V must be EC motors.
Hot gas loop not available.
Copper Fin Coils are available. Contact your

Sales
Representative or Account Engineer for more

information.
When Do You Choose a
Configurable Model
Choose when there is not a standard model listed

or you want to
add factory-installed options.
When ordering a configurable model, remember to

specify the
voltage and fan motor type.
Need a Reverse Cycle
Kit
Look on page 40 for the available kits in
the Shipped-Loose Accessories.
39
Section 5 Section 1
Walk-In Unit Coolers
Low Flow
Rev. 02/16 List Prices Effective February 15th,

2016. Prices and specifications subject to change

without notice.
Bohn
Standard
Model
Bohn
Configurable
Model
List
Price
($US)
Factory-Installed Options List
Price Adders ($US)
Coil Options
Bronz-Glow
Hot Gas Defrost Models with PSC Motors - 208-

230/1/60
- LOG070SE 5,165 Call Factory
- LOG087SE 5,805 Call Factory
- LOG118SE 7,316 Call Factory
- LOG125SE 7,530 Call Factory
- LOG150SE 7,722 Call Factory
- LOG165SE 9,026 Call Factory
LOG189BE LOG189SE 9,124 Call Factory
LOG225BE LOG225SE 10,254 Call Factory
LOG266BE LOG266SE 10,841 Call Factory
Hot Gas Defrost Models with Shaded Pole Motors -

115/1/60
LOG070AE LOG070SE 4,647 Call Factory
LOG087AE LOG087SE 5,289 Call Factory
LOG118AE LOG118SE 6,800 Call Factory
LOG125AE LOG125SE 7,014 Call Factory
LOG150AE LOG150SE 7,207 Call Factory
LOG165AE LOG165SE 8,502 Call Factory
Hot Gas Defrost Models with Shaded Pole Motors -

208-230/1/60
LOG070BE LOG070SE 4,817 Call Factory
LOG087BE LOG087SE 5,457 Call Factory
LOG118BE LOG118SE 6,968 Call Factory
LOG125BE LOG125SE 7,182 Call Factory
LOG150BE LOG150SE 7,374 Call Factory
LOG165BE LOG165SE 8,678 Call Factory
Hot Gas Defrost Models & Options
Federal Regulation Requires EC Motors!
Energy Independence and Security Act of 2007 (H.R.

6)
Walk-Ins manufactured on or after 01/01/2009 and

under 3,000 square feet
in area with single phase evaporator fan motors

less than 1 HP and less than
460V must be EC motors.
Notes:
Electric Drain Pan is standard on hot gas defrost

models.
Hot gas loop not available.
Need a Reverse Cycle
Kit
Look on page 40 for the available kits
in the Shipped-Loose Accessories.
Copper Fin Coils are available. Contact your

Sales
Representative or Account Engineer for more

information.
When Do You Choose a
Configurable Model
Choose when there is not a standard model listed

or you want to
add factory-installed options.
When ordering a configurable model, remember to

specify the
voltage and fan motor type.
40
Section 1
Walk-In Unit Coolers
Low Flow
List Prices Effective February 15th, 2016. Prices

and specifications subject to change without

notice. Rev. 02/16
Shipped-Loose Accessories
Can’t Find Something or need help selecting the

appropriate accessory for your unit Please contact

your local Sales Representative or
Account Engineer for assistance.
Part Number Description List Price
($US) Notes
Room Thermostats
2891040 Room Thermostat 286 -
28963101 Electronic Room Thermostat 361 -
Defrost Controls
4267W Adjustable Defrost Control / Fan Delay Switch

267 -
Check Valves
5890C 7/8" Suction Line Check Valve 201 -
Drain Line Heaters
5508Q 6 ft. Drain Line Heater (208-230V, 42 Watts)

145 -
5594P 12 ft. Drain Line Heater (208-230V, 84 Watts)

158 -
5595P 18 ft. Drain Line Heater (208-230V, 126

Watts) 187 -
5596P 36 ft. Drain Line Heater (208-230V, 252

Watts) 287 -
5597P 60 ft. Drain Line Heater (208-230V, 420

Watts) 529 -
Air Filters
89900801 Air Filters 374 Use on Models LO/LOD/LOG

070-125
89900802 Air Filters 313 Use on Models LO/LOD/LOG

150-225
89900803 Air Filters 313 Use on Models LO/LOD/LOG

266
Heat Exchangers
24200005 Heat Exchanger used on 070 - 118 Electric

& Hot Gas Defrost Models 260 3/8" Liquid Connection

OD, 7/8" Suction
Connecction OD, 14" Length, 2lbs Approx. Ship Wt.
24200006 Heat Exchanger used on 125 - 165 Electric

& Hot Gas Defrost Models 280 1/2" Liquid Connection

OD, 7/8" Suction
Connecction OD, 11" Length, 2lbs Approx. Ship Wt.
24200006 Heat Exchanger used on 125 - 165 Electric

& Hot Gas Defrost Models 280 1/2" Liquid Connection

OD, 7/8" Suction
Connecction OD, 11" Length, 2lbs Approx. Ship Wt.
24200007 Heat Exchanger used on 189 - 225 Electric

& Hot Gas Defrost Models 304 1/2" Liquid Connection

OD, 1-1/8"" Suction
Connecction OD, 14" Length, 2lbs Approx. Ship Wt.
24200008 Heat Exchanger used on 266 Electric & Hot

Gas Defrost Models 510 5/8" Liquid Connection OD,

1-3/8"" Suction
Connecction OD, 14" Length, 3lbs Approx. Ship Wt.
Expansion Valves (TXV)
When placing order, please specify refrigerant

type, saturated suction
temperature (SST), liquid temperature, and room

temperature.
Part Number List Price
($US) Capacity Range (BTUH)
TXV024 332 24,000 BTUH and under
TXV036 332 24,000 BTUH to 36,000 BTUH
TXV060 538 36,000 BTUH to 60,000 BTUH
Liquid-line Solenoid Valves (LLSV)
Part
Number
List
Price
($US)
Size
Capacity Range (R-404A)
Medium Temperature
Application (BTUH)
29318013 317 3/8 12,000 BTUH and under
4502Z 317 3/8 12,000 BTUH to 24,000 BTUH
29318011 342 3/8 24,000 BTUH to 44,000 BTUH
29318012 342 1/2 36,000 BTUH to 51,000 BTUH
5766Y 342 1/2 51,000 BTUH to 72,000 BTUH
Hot Gas Reverse Cycle Kits
Electric pan is standard on all hot gas models.
Bohn Models
Used On
TXV Bypass Kits
Part Number List Price
($US)
LOG070 - LOG225 89900901 307
LOG266 89901001 519
Hot gas loop not available.
Kits includes one check valve and piping for
liquid bypass around expansion valve and
(Hot Gas Models Only)
instructions for field installation.
41
Section 5 Section 1
Walk-In Unit Coolers
Rev. 02/16 List Prices Effective February 15th,

2016. Prices and specifications subject to change

without notice.
Low Velocity Center Mount Overview
Certifications
Standard Features
Product Description
WK 100 A C
Model Series Capacity Electrical Code Vintage
WK = Low Velocity Center
Mount, air defrost
WKE = Low Velocity Center
Mount, electric defrost
WKG= Low Velocity Center
Mount, hot gas defrost
# x 100 = BTUH A= 115/1/60
B = 208-230/1/60
AE = 115/1/60 (EC)
BE = 208-230/1/60 (EC)
S = Con gurable
Nomenclature
Ease of Installation & Service
Liquid line solenoid wire harness is factory-

installed for quick installation
All electrical components factory wired to

terminal board and identified,
making it easy to field wire the unit
Cabinet design features access panels on each end

for easy access to electrical
and refrigeration components
Fan panel is lightweight and can easily be

lowered for easy servicing and
installation
Expansion valve mounts inside the cabinet
Reliable & Durable
Heavy gauge grained aluminum cabinet cleans

easily and looks attractive
Stainless steel screws prevent rust streaks
Wire fan guards with PVC coating for durability
Sweat connections to reduce potential for leaks
Coils are dehydrated and sealed at the factory
Double drain pan eliminates drain pan sweating
Motor rail is design for maximum strength and

durability
Performance
Internally enhanced tubing and fin design for

higher efficiency
Electric defrost models incorporate high quality

tubular heaters and a standard
fixed defrost termination thermostat
Hot gas defrost models come with a shipped-loose

adjustable fan delay and
defrost termination thermostat
Motors are life lubricated and thermal overload

protected
Versatile
Low height makes it ideal for low ceiling coolers

- larger models are only 15
inches tall, allowing for maximum headroom and more

product storage
Unit designed to be mounted flush against the

ceiling or suspended on rods
The low velocity center mount units, available in

air,
electric, and hot gas defrost, are ideal for floral

storage,
fresh fruit and vegetables, dough retarding, fresh

meat
storage and preparations, and many other

applications.
The low air flow and quiet fans are classically

suited
for work room applications. The generous coil

surface
combined with close T.D. system balance provides

high
humidity characteristics to minimize product

shrinkage
and drying. Opting for EC motors or the Beacon II
Refrigeration System makes this product qualified

to be
included in the E Solutions product portfolio

because
of increased energy efficiency and cost savings.
42
Section 1
Low Velocity Center Mount
Walk-In Unit Coolers
List Prices Effective February 15th, 2016. Prices

and specifications subject to change without

notice. Rev. 02/16
Bohn
Standard
Model
Bohn
Configurable
Model
List
Price
($US)
Factory-Installed Options List Price Adders ($US)
Electrical Options Mechanical Options Coil Options
Beacon II
Assembly
Room
TSTAT TXV TXV &
LLSV
QCF,
TXV, &
LLSV
ElectroFin
Coil
BohnGuard
Fin Protection Bronz-Glow
Air Defrost Models with EC Motors - 115/1/60
WK050AEC WK050SC 3,515 1,399 291 523 809 1,401 Call

Factory 1,000 Call Factory
WK075AEC WK075SC 4,071 1,399 291 523 809 1,401 Call

Factory 1,000 Call Factory
WK100AEC WK100SC 4,991 1,399 291 523 809 1,401 Call

Factory 1,474 Call Factory
WK130AEC WK130SC 5,817 1,399 291 523 809 1,401 Call

Factory 1,474 Call Factory
WK155AEC WK155SC 6,499 1,399 291 523 809 1,401 Call

Factory 1,474 Call Factory
WK180AEC WK180SC 7,963 1,399 291 523 809 1,401 Call

Factory 2,010 Call Factory
WK210AEC WK210SC 9,024 1,399 291 523 809 - Call

Factory 2,341 Call Factory
WK270AEC WK270SC 9,882 1,399 291 523 809 - Call

Factory 2,341 Call Factory
WK340AEC WK340SC 12,674 1,399 291 858 1,241 - Call

Factory 3,177 Call Factory
Air Defrost Models with EC Motors - 208-230/1/60
WK050BEC WK050SC 3,702 1,399 291 523 809 1,401 Call

Factory 1,000 Call Factory
WK075BEC WK075SC 4,292 1,399 291 523 809 1,401 Call

Factory 1,000 Call Factory
WK100BEC WK100SC 5,245 1,399 291 523 809 1,401 Call

Factory 1,474 Call Factory
WK130BEC WK130SC 6,126 1,399 291 523 809 1,401 Call

Factory 1,474 Call Factory
WK155BEC WK155SC 6,846 1,399 291 523 809 1,401 Call

Factory 1,474 Call Factory
WK180BEC WK180SC 8,376 1,399 291 523 809 1,401 Call

Factory 2,010 Call Factory
WK210BEC WK210SC 9,483 1,399 291 523 809 - Call

Factory 2,341 Call Factory
WK270BEC WK270SC 10,389 1,399 291 523 809 - Call

Factory 2,341 Call Factory
WK340BEC WK340SC 13,326 1,399 291 858 1,241 - Call

Factory 3,177 Call Factory
Air Defrost Models with PSC Motors - 115/1/60
WK050AC WK050SC 3,162 1,399 291 523 809 1,401 Call

Factory 1,000 Call Factory
WK075AC WK075SC 3,718 1,399 291 523 809 1,401 Call

Factory 1,000 Call Factory
WK130AC WK130SC 5,111 1,399 291 523 809 1,401 Call

Factory 1,474 Call Factory
WK100AC WK100SC 4,285 1,399 291 523 809 1,401 Call

Factory 1,474 Call Factory
WK155AC WK155SC 5,793 1,399 291 523 809 1,401 Call

Factory 1,474 Call Factory
WK180AC WK180SC 6,904 1,399 291 523 809 1,401 Call

Factory 2,010 Call Factory
WK210AC WK210SC 7,612 1,399 291 523 809 - Call

Factory 2,341 Call Factory
WK270AC WK270SC 8,470 1,399 291 523 809 - Call

Factory 2,341 Call Factory
WK340AC WK340SC 10,909 1,399 291 858 1,241 - Call

Factory 3,177 Call Factory
Air Defrost Models & Options
Notes:
Beacon II must be ordered as a system.
TXV = Expansion Valve; LLSV = Liquid Line

Solenoid Valve; QCF = Quick Federal Regulation

Requires EC Motors!
Energy Independence and Security Act of 2007 (H.R.

6)
Walk-Ins manufactured on or after 01/01/2009 and

under 3,000 square feet
in area with single phase evaporator fan motors

less than 1 HP and less than
460V must be EC motors.
When Do You Choose a
Configurable Model
Choose when there is not a standard model listed

or you want
to add factory-installed options.
When ordering a configurable model, remember to

specify the
voltage and fan motor type.
Connect Fittings.
460V Fan Motors, Stainless Steel Cabinet & Pan,

and Copper Fin Coils
are available. Contact your Sales Representative or

Account Engineer
for more information.
43
Section 5 Section 1
Low Velocity Center Mount
Walk-In Unit Coolers
Rev. 02/16 List Prices Effective February 15th,

2016. Prices and specifications subject to change

without notice.
Bohn
Standard
Model
Bohn
Configurable
Model
List
Price
($US)
Factory-Installed Options List Price Adders ($US)
Electrical Options Mechanical Options Coil Options
Beacon II
Assembly
Room
TSTAT TXV TXV &
LLSV
QCF,
TXV, &
LLSV
ElectroFin
Coil
BohnGuard
Fin Protection Bronz-Glow
Air Defrost Models with PSC Motors - 208-230/1/60
WK050BC WK050SC 3,349 1,399 291 523 809 1,401 Call

Factory 1,000 Call Factory
WK075BC WK075SC 3,939 1,399 291 523 809 1,401 Call

Factory 1,000 Call Factory
WK100BC WK100SC 4,539 1,399 291 523 809 1,401 Call

Factory 1,474 Call Factory
WK130BC WK130SC 5,420 1,399 291 523 809 1,401 Call

Factory 1,474 Call Factory
WK155BC WK155SC 6,140 1,399 291 523 809 1,401 Call

Factory 1,474 Call Factory
WK180BC WK180SC 7,317 1,399 291 523 809 1,401 Call

Factory 2,010 Call Factory
WK210BC WK210SC 8,071 1,399 291 523 809 - Call

Factory 2,341 Call Factory
WK270BC WK270SC 8,977 1,399 291 523 809 - Call

Factory 2,341 Call Factory
WK340BC WK340SC 11,561 1,399 291 858 1,241 - Call

Factory 3,177 Call Factory
Air Defrost Models & Options
When Do You Choose a
Configurable Model
Choose when there is not a standard model listed

or you want
to add factory-installed options.
When ordering a configurable model, remember to

specify the
voltage and fan motor type.
Federal Regulation Requires EC Motors!
Energy Independence and Security Act of 2007 (H.R.

6)
Walk-Ins manufactured on or after 01/01/2009 and

under 3,000 square feet
in area with single phase evaporator fan motors

less than 1 HP and less than
460V must be EC motors.
Notes:
Beacon II must be ordered as a system.
TXV = Expansion Valve; LLSV = Liquid Line

Solenoid Valve; QCF = Quick
Connect Fittings.
460V Fan Motors, Stainless Steel Cabinet & Pan,

and Copper Fin Coils
are available. Contact your Sales Representative or

Account Engineer
for more information.
44
Section 1
Low Velocity Center Mount
Walk-In Unit Coolers
List Prices Effective February 15th, 2016. Prices

and specifications subject to change without

notice. Rev. 02/16
Electric Defrost Models & Options
Notes:
Electric Drain Pan is standard.
Beacon II must be ordered as a system.
TXV = Expansion Valve; LLSV = Liquid Line

Solenoid Valve; QCF = Quick
Federal Regulation Requires EC Motors!
Energy Independence and Security Act of 2007 (H.R.

6)
Walk-Ins manufactured on or after 01/01/2009 and

under 3,000 square feet
in area with single phase evaporator fan motors

less than 1 HP and less than
460V must be EC motors.
When Do You Choose a
Configurable Model
Bohn
Standard
Model
Bohn
Configurable
Model
List
Price
($US)
Factory-Installed Options List Price Adders ($US)
Electrical Options Mechanical Options Coil Options
Beacon II
Assembly
Adj. Defrost
Term. / Fan
Delay
Room
TSTAT TXV TXV &
LLSV
QCF,
TXV, &
LLSV
Bronz-Glow
Electric Defrost Models with EC Motors - 208-

230/1/60
WKE050BEC WKE050SC 4,110 1,399 485 291 523 809

1,401 Call Factory
WKE075BEC WKE075SC 4,770 1,399 485 291 523 809

1,401 Call Factory
WKE100BEC WKE100SC 5,805 1,399 485 291 523 809

1,401 Call Factory
WKE130BEC WKE130SC 6,787 1,399 485 291 523 809

1,401 Call Factory
WKE155BEC WKE155SC 7,600 1,399 485 291 523 809

1,401 Call Factory
WKE180BEC WKE180SC 9,271 1,399 485 291 523 809

1,401 Call Factory
WKE210BEC WKE210SC 10,470 1,399 485 291 523 809 -

Call Factory
WKE270BEC WKE270SC 11,488 1,399 485 291 523 809 -

Call Factory
WKE340BEC WKE340SC 14,746 1,399 485 291 858 1,241 -

Call Factory
Electric Defrost Models with PSC Motors - 208-

230/1/60
WKE050BC WKE050SC 3,757 1,399 485 291 523 809 1,401

Call Factory
WKE075BC WKE075SC 4,417 1,399 485 291 523 809 1,401

Call Factory
WKE100BC WKE100SC 5,099 1,399 485 291 523 809 1,401

Call Factory
WKE130BC WKE130SC 6,081 1,399 485 291 523 809 1,401

Call Factory
WKE155BC WKE155SC 6,894 1,399 485 291 523 809 1,401

Call Factory
WKE180BC WKE180SC 8,212 1,399 485 291 523 809 1,401

Call Factory
WKE210BC WKE210SC 9,058 1,399 485 291 523 809 -

Call Factory
WKE270BC WKE270SC 10,076 1,399 485 291 523 809 -

Call Factory
WKE340BC WKE340SC 12,981 1,399 485 291 858 1,241 -

Call Factory
Choose when there is not a standard model listed

or you want
to add factory-installed options.
When ordering a configurable model, remember to

specify the
voltage and fan motor type.
Connect Fittings.
460V Fan Motors, Stainless Steel Cabinet & Pan,

and Copper Fin Coils
are available. Contact your Sales Representative or

Account Engineer
for more information.
45
Section 5 Section 1
Low Velocity Center Mount
Walk-In Unit Coolers
Rev. 02/16 List Prices Effective February 15th,

2016. Prices and specifications subject to change

without notice.
Hot Gas Defrost Models & Options
Notes:
Electric Drain Pan is standard. Hot gas loop not

available.
Adjustable Defrost Term. / Fan Delay is standard.
TXV = Expansion Valve; LLSV = Liquid Line

Solenoid Valve.
460V Fan Motors, Stainless Steel Cabinet & Pan,

and Copper Fin Coils
Federal Regulation Requires EC Motors!
Energy Independence and Security Act of 2007 (H.R.

6)
Walk-Ins manufactured on or after 01/01/2009 and

under 3,000 square feet
in area with single phase evaporator fan motors

less than 1 HP and less than
460V must be EC motors.
Bohn
Standard
Model
Bohn
Configurable
Model
List
Price
($US)
Factory-Installed Options List Price Adders ($US)
Mechanical Options Coil Options
TXV TXV & LLSV ElectroFin
Coil Bronz-Glow
Hot Gas Defrost Models with EC Motors - 115/1/60
- WKG100SC 5,267 523 809 Call Factory Call Factory
- WKG130SC 6,635 523 809 Call Factory Call Factory
- WKG155SC 7,426 523 809 Call Factory Call Factory
- WKG180SC 9,065 523 809 Call Factory Call Factory
- WKG210SC 10,245 523 809 Call Factory Call Factory
- WKG270SC 11,236 523 809 Call Factory Call Factory
- WKG340SC 14,420 858 1,241 Call Factory Call

Factory
Hot Gas Defrost Models with EC Motors - 208-

230/1/60
- WKG100SC 5,541 523 809 Call Factory Call Factory
- WKG130SC 6,990 523 809 Call Factory Call Factory
- WKG155SC 7,831 523 809 Call Factory Call Factory
- WKG180SC 9,547 523 809 Call Factory Call Factory
- WKG210SC 10,770 523 809 Call Factory Call Factory
- WKG270SC 11,825 523 809 Call Factory Call Factory
- WKG340SC 15,177 858 1,241 Call Factory Call

Factory
Hot Gas Defrost Models with PSC Motors - 115/1/60
WKG100AC WKG100SC 4,561 523 809 Call Factory Call

Factory
WKG130AC WKG130SC 5,929 523 809 Call Factory Call

Factory
WKG155AC WKG155SC 6,720 523 809 Call Factory Call

Factory
WKG180AC WKG180SC 8,006 523 809 Call Factory Call

Factory
WKG210AC WKG210SC 8,833 523 809 Call Factory Call

Factory
WKG270AC WKG270SC 9,824 523 809 Call Factory Call

Factory
WKG340AC WKG340SC 12,655 858 1,241 Call Factory

Call Factory
Hot Gas Defrost Models with PSC Motors - 208-

230/1/60
WKG100BC WKG100SC 4,835 523 809 Call Factory Call

Factory
WKG130BC WKG130SC 6,284 523 809 Call Factory Call

Factory
WKG155BC WKG155SC 7,125 523 809 Call Factory Call

Factory
WKG180BC WKG180SC 8,488 523 809 Call Factory Call

Factory
WKG210BC WKG210SC 9,358 523 809 Call Factory Call

Factory
WKG270BC WKG270SC 10,413 523 809 Call Factory Call

Factory
WKG340BC WKG340SC 13,412 858 1,241 Call Factory

Call Factory
When ordering a configurable model, remember to

specify the
voltage and fan motor type.
are available. Contact your Sales Representative or

Account Engineer
for more information.
When Do You Choose a
Configurable Model
Choose when there is not a standard model listed

or you want
to add factory-installed options.
Need a Reverse Cycle Kit
Look on page 46 for the available kits in
the Shipped-Loose Accessories.
46
Section 1
Low Velocity Center Mount
Walk-In Unit Coolers
List Prices Effective February 15th, 2016. Prices

and specifications subject to change without

notice. Rev. 02/16
Shipped-Loose Accessories
Can’t Find Something or need help selecting the

appropriate accessory for your unit Please contact

267 -
21340101 Electric Defrost Timer (60 Hz) 334 -
5505-R 30-Amp Contactor 358 Use as fan or heater

contactor
Check Valves
5890C 7/8" Suction Line Check Valve 201 -
5889C 1 1/8" Suction Line Check Valve 391 -
2933022 1 3/8" Suction Line Check Valve 807 -
Drain Line Heaters
5508Q 6 ft. Drain Line heater (208-230V, 42 Watts)

145 -
5594P 12 ft. Drain Line heater (208-230V, 84 Watts)

158 -
5595P 18 ft. Drain Line heater (208-230V, 126

Watts) 187 -
5596P 36 ft. Drain Line heater (208-230V, 252

Watts) 287 -
5597P 60 ft. Drain Line heater (208-230V, 420

Watts) 529 -
Heat Exchangers
24200004 Heat Exchanger used on 050 Electric

Defrost Models 237 3/8" Liquid Connection OD, 5/8"

Suction Connecction
OD, 14" Length, 2lbs Approx. Ship Wt.
24200005 Heat Exchanger used on 075 - 100 Electric

& Hot Gas Defrost Models 260 3/8" Liquid Connection

OD, 7/8" Suction Connecction
OD, 14" Length, 2lbs Approx. Ship Wt.
24200006 Heat Exchanger used on 130 - 155 Electric

& Hot Gas Defrost Models 280 1/2" Liquid Connection

OD, 7/8" Suction Connecction
OD, 11" Length, 2lbs Approx. Ship Wt.
24200007 Heat Exchanger used on 180 - 270 Electric

& Hot Gas Defrost Models 304 1/2" Liquid Connection

OD, 1-1/8"" Suction
Connecction OD, 14" Length, 2lbs Approx. Ship Wt.
24200008 Heat Exchanger used on 340 Electric & Hot

Gas Defrost Models 510 5/8" Liquid Connection OD,

1-3/8"" Suction
Connecction OD, 14" Length, 3lbs Approx. Ship Wt.
Expansion Valves (TXV)
When placing order, please specify refrigerant

type, saturated suction
temperature (SST), liquid temperature, and room

temperature.
Part
Number
List
Price
($US)
Capacity Range (BTUH)
TXV024 332 24,000 BTUH and under
TXV036 332 24,000 BTUH to 36,000 BTUH
TXV060 538 36,000 BTUH to 60,000 BTUH
TXV120 682 60,000 BTUH to 120,000 BTUH
Liquid-line Solenoid Valves (LLSV)
Part
Number
List
Price
($US)
Size
Capacity Range (R-404A)
Medium Temperature
Application (BTUH)
29318013 317 3/8 12,000 BTUH and under
4502Z 317 3/8 12,000 BTUH to 24,000 BTUH
29318011 342 3/8 24,000 BTUH to 44,000 BTUH
29318012 342 1/2 36,000 BTUH to 51,000 BTUH
5766Y 342 1/2 51,000 BTUH to 72,000 BTUH
Hot Gas Reverse Cycle Kits
Electric pan is standard on all hot gas models.
Bohn Models
Used On
TXV Bypass Kits
List Price
($US)
Type SQE, SBF,
or HFESC Type S
Part Number Part Number
WKG100 89897801 89898001 411
WKG130 - WKG270 89897802 89898002 411
WKG340 89897803 89898003 411
(Hot Gas Models Only)
Hot gas loop not available.
Kits includes one check valve and piping
for liquid bypass around expansion valve and
instructions for field installation.
47
Section 5 Section 1
Walk-In Unit Coolers
Rev. 02/16 List Prices Effective February 15th,

2016. Prices and specifications subject to change

without notice.
Center Mount Overview
Standard Features
Ease of Installation & Service
Panels on ends quickly remove for complete access

to refrigerant components
and electrical terminal block during installation

and servicing
Tapered mounting provides proper slope for

condensate drainage to one end
of the unit
Reliable & Durable
Heavy-gauge grained aluminum cabinet cleans

easily and looks attractive
Stainless steel screws prevent rust streaks
Wire fan guards with PVC coating for durability
Coils are dehydrated and sealed at the factory
Double drain pan eliminates drain pan sweating
Performance
Quick disconnect, waterproof plug and receptacle

for each motor in all models
High-efficiency aluminum fins with full collars

cover mechanically expanded
copper tubes
Product Description
Certifications
Center mount unit coolers, available in air or

electric
defrost, are ideal for tight storage situations

because
they are ceiling mount and have a height of only 8

-
5/8" allowing for maximum headroom in a cooler or
freezer. The center mount design allows for product

to
be stacked all around while air flow distributes

evenly
throughout the box. Opting for EC motors or the
Beacon II Refrigeration System makes this product
qualified to be included in the E Solutions

product
portfolio because of increased energy efficiency

and
cost savings.
Nomenclature
Highest quality tubular heaters provide fast and

economical defrost
Generous coil surface gives proper compressor

balance
Standard adjustable defrost termination fan delay

thermostat
Motors are life lubricated and thermal overload

protected
Air moves across the ceiling in both directions

providing even air distribution
throughout the cooler
Versatile
Compact, ceiling mount and center mount design

allows for shelving and
storage of product around all walls
48
Section 1
Center Mount
Walk-In Unit Coolers
List Prices Effective February 15th, 2016. Prices

and specifications subject to change without

notice. Rev. 02/16
Air Defrost Models & Options
Notes:
Beacon II must be ordered as a system.
TXV = Expansion Valve; LLSV = Liquid Line

Solenoid Valve; QCF = Quick Federal Regulation

Requires EC Motors!
Energy Independence and Security Act of 2007 (H.R.

6)
Walk-Ins manufactured on or after 01/01/2009 and

under 3,000 square feet
in area with single phase evaporator fan motors

less than 1 HP and less than
460V must be EC motors.
When Do You Choose a
Configurable Model
Choose when there is not a standard model listed

or you want
to add factory-installed options.
When ordering a configurable model, remember to

specify the
voltage and fan motor type.
Bohn
Standard
Model
Bohn
Configurable
Model
List
Price
($US)
Factory Installed Options List Price Adders ($US)
Electrical Options Mechanical Options Coil Options
Beacon II
Assembly
Room
TSTAT TXV TXV &
LLSV
QCF,
TXV, &
LLSV
BohnKote ElectroFin
Coil
BohnGuard
Fin Protection Bronz-Glow
Air Defrost Models with EC Motors - 115/1/60
SM052AEE SM052SE 2,367 1,399 291 523 809 1,401 627

Call Factory 585 Call Factory
SM076AEE SM076SE 3,162 1,399 291 523 809 1,401 861

Call Factory 802 Call Factory
SM090AEE SM090SE 3,477 1,399 291 523 809 1,401 861

Call Factory 802 Call Factory
SM102AEE SM102SE 3,774 1,399 291 523 809 1,401 861

Call Factory 802 Call Factory
SM108AEE SM108SE 4,253 1,399 291 523 809 1,401 Call

Factory Call Factory 1,138 Call Factory
SM134AEE SM134SE 4,751 1,399 291 523 809 1,401 Call

Factory Call Factory 1,138 Call Factory
SM156AEE SM156SE 5,214 1,399 291 523 809 1,401 Call

Factory Call Factory 1,138 Call Factory
SM179AEE SM179SE 5,998 1,399 291 523 809 1,401 Call

Factory Call Factory 1,416 Call Factory
SM208AEE SM208SE 6,560 1,399 291 523 809 1,401 Call

Factory Call Factory 1,416 Call Factory
SM249AEE SM249SE 8,029 1,399 291 523 809 1,401 Call

Factory Call Factory 1,824 Call Factory
Air Defrost Models with EC Motors - 208-230/1/60
SM052BEE SM052SE 2,527 1,399 291 523 809 1,401 627

Call Factory 585 Call Factory
SM076BEE SM076SE 3,354 1,399 291 523 809 1,401 861

Call Factory 802 Call Factory
SM090BEE SM090SE 3,668 1,399 291 523 809 1,401 861

Call Factory 802 Call Factory
SM102BEE SM102SE 3,969 1,399 291 523 809 1,401 861

Call Factory 802 Call Factory
SM108BEE SM108SE 4,489 1,399 291 523 809 1,401 Call

Factory Call Factory 1,138 Call Factory
SM134BEE SM134SE 4,977 1,399 291 523 809 1,401 Call

Factory Call Factory 1,138 Call Factory
SM156BEE SM156SE 5,441 1,399 291 523 809 1,401 Call

Factory Call Factory 1,138 Call Factory
SM179BEE SM179SE 6,255 1,399 291 523 809 1,401 Call

Factory Call Factory 1,416 Call Factory
SM208BEE SM208SE 6,831 1,399 291 523 809 1,401 Call

Factory Call Factory 1,416 Call Factory
SM249BEE SM249SE 8,327 1,399 291 523 809 1,401 Call

Factory Call Factory 1,824 Call Factory
Air Defrost Models with PSC Motors - 115/1/60
SM052AE SM052SE 2,014 1,399 291 523 809 1,401 627

Call Factory 585 Call Factory
SM076AE SM076SE 2,456 1,399 291 523 809 1,401 861

Call Factory 802 Call Factory
SM090AE SM090SE 2,771 1,399 291 523 809 1,401 861

Call Factory 802 Call Factory
SM102AE SM102SE 3,068 1,399 291 523 809 1,401 861

Call Factory 802 Call Factory
SM108AE SM108SE 3,194 1,399 291 523 809 1,401 Call

Factory Call Factory 1,138 Call Factory
SM134AE SM134SE 3,692 1,399 291 523 809 1,401 Call

Factory Call Factory 1,138 Call Factory
SM156AE SM156SE 4,155 1,399 291 523 809 1,401 Call

Factory Call Factory 1,138 Call Factory
SM179AE SM179SE 4,586 1,399 291 523 809 1,401 Call

Factory Call Factory 1,416 Call Factory
SM208AE SM208SE 5,148 1,399 291 523 809 1,401 Call

Factory Call Factory 1,416 Call Factory
SM249AE SM249SE 6,264 1,399 291 523 809 1,401 Call

Factory Call Factory 1,824 Call Factory
Connect Fittings.
460V Fan Motors, Stainless Steel Cabinet & Pan,

and Copper Fin Coils
are available. Contact your Sales Representative or

Account Engineer
for more information.
49
Section 5 Section 1
Center Mount
Walk-In Unit Coolers
Rev. 02/16 List Prices Effective February 15th,

2016. Prices and specifications subject to change

without notice.
Bohn
Standard
Model
Bohn
Configurable
Model
List
Price
($US)
Factory Installed Options List Price Adders ($US)
Electrical Options Mechanical Options Coil Options
Beacon II
Assembly
Room
TSTAT TXV TXV &
LLSV
QCF,
TXV, &
LLSV
BohnKote ElectroFin
Coil
BohnGuard
Fin Protection Bronz-Glow
Air Defrost Models with PSC Motors - 208-230/1/60
SM052BE SM052SE 2,174 1,399 291 523 809 1,401 627

Call Factory 585 Call Factory
SM076BE SM076SE 2,648 1,399 291 523 809 1,401 861

Call Factory 802 Call Factory
SM090BE SM090SE 2,962 1,399 291 523 809 1,401 861

Call Factory 802 Call Factory
SM102BE SM102SE 3,263 1,399 291 523 809 1,401 861

Call Factory 802 Call Factory
SM108BE SM108SE 3,430 1,399 291 523 809 1,401 Call

Factory Call Factory 1,138 Call Factory
SM134BE SM134SE 3,918 1,399 291 523 809 1,401 Call

Factory Call Factory 1,138 Call Factory
SM156BE SM156SE 4,382 1,399 291 523 809 1,401 Call

Factory Call Factory 1,138 Call Factory
SM179BE SM179SE 4,849 1,399 291 523 809 1,401 Call

Factory Call Factory 1,416 Call Factory
SM208BE SM208SE 5,419 1,399 291 523 809 1,401 Call

Factory Call Factory 1,416 Call Factory
SM249BE SM249SE 6,562 1,399 291 523 809 1,401 Call

Factory Call Factory 1,824 Call Factory
Air Defrost Models & Options
Federal Regulation Requires EC Motors!
Energy Independence and Security Act of 2007 (H.R.

6)
Walk-Ins manufactured on or after 01/01/2009 and

under 3,000 square feet
in area with single phase evaporator fan motors

less than 1 HP and less than
460V must be EC motors.
When Do You Choose a
Configurable Model
Notes:
Beacon II must be ordered as a system.
TXV = Expansion Valve; LLSV = Liquid Line

Solenoid Valve; QCF = Quick
Connect Fittings.
460V Fan Motors, Stainless Steel Cabinet & Pan,

and Copper Fin Coils
are available. Contact your Sales Representative or

Account Engineer
for more information.
Choose when there is not a standard model listed

or you want
to add factory-installed options.
When ordering a configurable model, remember to

specify the
voltage and fan motor type.
50
Section 1
Center Mount
Walk-In Unit Coolers
List Prices Effective February 15th, 2016. Prices

and specifications subject to change without

notice. Rev. 02/16
Electric Defrost Models & Options
When Do You Choose a
Configurable Model
Choose when there is not a standard model listed

or you want
to add factory-installed options.
When ordering a configurable model, remember to

specify the
voltage and fan motor type.
Bohn
Standard
Model
Bohn
Configurable
Model
List
Price
($US)
Factory-Installed Options List Price Adders ($US)
Electrical Options Mechanical Options Coil Options
Beacon II
Assembly
Room
TSTAT TXV TXV &
LLSV
QCF,
TXV, &
LLSV
Bronz-Glow
Electric Defrost Models with EC Motors - 208-

230/1/60
SME040BEE SME040SE 3,108 1,399 291 523 809 1,401

Call Factory
SME054BEE SME054SE 4,190 1,399 291 523 809 1,401

Call Factory
SME065BEE SME065SE 4,337 1,399 291 523 809 1,401

Call Factory
SME090BEE SME090SE 5,454 1,399 291 523 809 1,401

Call Factory
SME130BEE SME130SE 5,969 1,399 291 523 809 1,401

Call Factory
SME174BEE SME174SE 7,738 1,399 291 523 809 1,401

Call Factory
Electric Defrost Models with PSC Motors - 208-

230/1/60
SME040BE SME040SE 2,755 1,399 291 523 809 1,401

Call Factory
SME054BE SME054SE 3,484 1,399 291 523 809 1,401

Call Factory
SME065BE SME065SE 3,631 1,399 291 523 809 1,401

Call Factory
SME090BE SME090SE 4,395 1,399 291 523 809 1,401

Call Factory
SME130BE SME130SE 4,910 1,399 291 523 809 1,401

Call Factory
SME174BE SME174SE 6,326 1,399 291 523 809 1,401

Call Factory
Notes:
Electric Drain Pan and Adjustable Defrost Term. /

Fan Delay are standard. Federal Regulation Requires

EC Motors!
Energy Independence and Security Act of 2007 (H.R.

6)
Walk-Ins manufactured on or after 01/01/2009 and

under 3,000 square feet
in area with single phase evaporator fan motors

less than 1 HP and less than
460V must be EC motors.
Beacon II must be ordered as a system.
TXV = Expansion Valve; LLSV = Liquid Line

Solenoid Valve; QCF = Quick
Connect Fittings.
460V Fan Motors, Stainless Steel Cabinet & Pan,

and Copper Fin Coils
are available. Contact your Sales Representative or

Account Engineer
for more information.
51
Section 5 Section 1
Center Mount
Walk-In Unit Coolers
Rev. 02/16 List Prices Effective February 15th,

2016. Prices and specifications subject to change

without notice.
Shipped-Loose Accessories
Can’t Find Something or need help selecting the

appropriate accessory for your unit Please contact

your local Sales Representative or
Account Engineer for assistance.
Part Number Description List Price
($US) Notes
Room Thermostats
2891040 Room Thermostats 286 -
28963101 Electronic Room Thermostat 361 -
Defrost Controls
4267W Adjustable Defrost Control / Fan Delay Switch

267 -
Check Valves
5890C 7/8" Suction Line Check Valve 201 -
5889C 1 1/8" Suction Line Check Valve 391 -
Drain Line Heaters
5508Q 6 ft. Drain Line heater (208-230V, 42 Watts)

145 -
5594P 12 ft. Drain Line heater (208-230V, 84 Watts)

158 -
5595P 18 ft. Drain Line heater (208-230V, 126

Watts) 187 -
5596P 36 ft. Drain Line heater (208-230V, 252

Watts) 287 -
5597P 60 ft. Drain Line heater (208-230V, 420

Watts) 529 -
Heat Exchangers
24200004 Heat Exchanger used on 040 Electric

Defrost Models 237 3/8" Liquid Connection OD, 5/8"

Suction Connecction OD, 14"
Length, 2lbs Approx. Ship Wt.
24200005 Heat Exchanger used on 054 - 090 Electric

Defrost Models 260 3/8" Liquid Connection OD, 7/8"

Suction Connecction OD, 14"
Length, 2lbs Approx. Ship Wt.
24200007 Heat Exchanger used on 130-174 Electric

Defrost Models 304 1/2" Liquid Connection OD, 1-

1/8" Suction Connecction OD,
14" Length, 2lbs Approx. Ship Wt.
Expansion Valves (TXV)
When placing order, please specify refrigerant

type, saturated
suction temperature (SST), liquid temperature, and

room
temperature.
Part
Number
List Price
($US) Capacity Range (BTUH)
TXV024 332 24,000 BTUH and under
TXV036 332 24,000 BTUH to 36,000 BTUH
TXV060 538 36,000 BTUH to 60,000 BTUH
Liquid-line Solenoid Valves (LLSV)
Part
Number
List Price
($US) Size
Capacity Range (R-404A)
Medium Temperature Application
(BTUH)
Low Temperature Application
(BTUH)
29318013 317 3/8 12,000 BTUH and under 11,000 BTUH

and under
4502Z 317 3/8 12,000 BTUH to 24,000 BTUH 11,000

BTUH to 21,000 BTUH
29318011 342 3/8 24,000 BTUH to 44,000 BTUH 21,000

BTUH to 38,000 BTUH
52
Section 1
Walk-In Unit Coolers
List Prices Effective February 15th, 2016. Prices

and specifications subject to change without

notice. Rev. 02/16
Medium Profile Overview
Product Description
Certifications
Medium profile unit coolers, available in air,

electric,
and hot gas defrost, are ideal for numerous

commercial
and industrial applications. With a modular design

that
is only 25 inches high, these units provide

superior
quality and a long, dependable life for many

different
applications. Opting for EC motors or the Beacon II
Refrigeration System makes this product qualified

to be
included in the E Solutions product portfolio

because
of increased energy efficiency and cost savings.
Standard Features
Ease of Installation & Service
All electrical components factory wired to

terminal board and identified,
making it easy to field wire the unit
Schrader valve provided for suction pressure

measurement
Liquid line solenoid wire harness is factory-

installed for quick installation
Coil heater slots have been enlarged for easier

installation and replacement
Heaters are coil face mounted for easy access
Front hinged drain pan for easy access
Motors plug into wiring harness for easier

servicing
Reliable & Durable
Heavy gauge textured aluminum cabinet
Sweat connections to reduce potential for leaks
Patented Thermo-Flex coil design allows the coil

to “flex” during periods of
defrost resulting in expansion of the coil surface

comes with a 5-year warranty
Heavy plastic molded fan guards for extended air

throw
Reliable nickel steel alloy defrost heater

elements
Thermally protected, lifetime-lubricated single

phase PSC motors
Performance
External equalizer connection
Internal panels are isolated for quiet operation
Electric defrost models have fixed defrost

termination / fan delay and heater
limit thermostats
PSC motors
Versatile
Large diameter drain fitting (3/4” ID)
Beacon II compatible
Different motor and voltage options available
Nomenclature
53
Section 5 Section 1
Walk-In Unit Coolers
Medium Profile
Rev. 02/16 List Prices Effective February 15th,

2016. Prices and specifications subject to change

without notice.
Notes:
Beacon II must be ordered as a system.
Variable Speed EC (VSEC) motors require a

customer supplied 0-10V
Air Defrost Models & Options
When Do You Choose a
Configurable Model
Choose when there is not a standard model listed

or you want
to add factory-installed options.
When ordering a configurable model, remember to

specify the
voltage and fan motor type.
signal.
TXV = Expansion Valve; LLSV = Liquid Line

Solenoid Valve
Molded fan guards are standard and ring fan

guards optional at no
additional cost.
Double Wall Insulated Pans, Stainless Steel

Cabinet & Pan, and Copper
Fin Coils are available. Contact your Sales

Representative or Account
Engineer for more information.
Regulations Require EC or VSEC Motors!
Federal Energy Independence and Security Act of

2007 (H.R. 6)
Walk-Ins manufactured on or after 01/01/2009 and

under 3,000 square feet
in area with single phase evaporator fan motors

less than 1 HP and less than
460V must be EC motors.
California Energy Commission Title 24, Section 126
Effective 01/01/2010, refrigerated warehouses with

a total cold storage
and frozen storage area exceeding 3,000 square feet

with single phase
evaporator fan motors less than 1 HP and less than

460V must be variable
speed EC motors and controlled in response to space

conditions.
Bohn
Standard
Model
Bohn
Configurable
Model
List
Price
($US)
Factory-Installed Options List Price Adders ($US)
Electrical Options Mechanical
Options Coil Options
Beacon II
Assembly
Room
TSTAT TXV TXV &
LLSV BohnKote ElectroFin
Coil
BohnGuard
Fin Protection Bronz-Glow
Air Defrost Models with VSEC Motors - 115/1/60
- BMA130SA 4,453 2,220 291 552 840 1,221 Call

Factory 1,104 Call Factory
- BMA155SA 5,112 2,220 291 552 840 1,221 Call

Factory 1,104 Call Factory
- BMA245SA 7,734 2,220 291 552 840 Call Factory

Call Factory 1,164 Call Factory
- BMA300SA 9,401 2,220 291 552 840 Call Factory

Call Factory 1,164 Call Factory
- BMA365SA 12,030 2,220 291 741 1,190 Call Factory

Call Factory 1,227 Call Factory
- BMA450SA 13,909 2,220 291 741 1,190 Call Factory

Call Factory 1,227 Call Factory
- BMA510SA 16,610 2,220 291 741 1,190 Call Factory

Call Factory 1,282 Call Factory
- BMA600SA 17,428 2,220 291 741 1,190 Call Factory

Call Factory 1,282 Call Factory
Air Defrost Models with VSEC Motors - 208-230/1/60
- BMA130SA 4,518 2,220 291 552 840 1,221 Call

Factory 1,104 Call Factory
- BMA155SA 5,171 2,220 291 552 840 1,221 Call

Factory 1,104 Call Factory
- BMA245SA 7,857 2,220 291 552 840 Call Factory

Call Factory 1,164 Call Factory
- BMA300SA 9,525 2,220 291 552 840 Call Factory

Call Factory 1,164 Call Factory
- BMA365SA 12,221 2,220 291 741 1,190 Call Factory

Call Factory 1,227 Call Factory
- BMA450SA 14,101 2,220 291 741 1,190 Call Factory

Call Factory 1,227 Call Factory
- BMA510SA 16,859 2,220 291 741 1,190 Call Factory

Call Factory 1,282 Call Factory
- BMA600SA 17,681 2,220 291 741 1,190 Call Factory

Call Factory 1,282 Call Factory
- BMA710SA 20,456 2,220 291 1,074 1,649 Call

Factory Call Factory 1,315 Call Factory
Air Defrost Models with EC Motors - 115/1/60
- BMA130SA 4,218 2,220 291 552 840 1,221 Call

Factory 1,104 Call Factory
- BMA155SA 4,877 2,220 291 552 840 1,221 Call

Factory 1,104 Call Factory
- BMA245SA 7,264 2,220 291 552 840 Call Factory

Call Factory 1,164 Call Factory
- BMA300SA 8,931 2,220 291 552 840 Call Factory

Call Factory 1,164 Call Factory
- BMA365SA 11,325 2,220 291 741 1,190 Call Factory

Call Factory 1,227 Call Factory
- BMA450SA 13,204 2,220 291 741 1,190 Call Factory

Call Factory 1,227 Call Factory
- BMA510SA 15,670 2,220 291 741 1,190 Call Factory

Call Factory 1,282 Call Factory
- BMA600SA 16,488 2,220 291 741 1,190 Call Factory

Call Factory 1,282 Call Factory
54
Section 1
Walk-In Unit Coolers
Medium Profile
List Prices Effective February 15th, 2016. Prices

and specifications subject to change without

notice. Rev. 02/16
When Do You Choose a
Configurable Model
Choose when there is not a standard model listed

or you want
Air Defrost Models & Options
Notes:
Beacon II must be ordered as a system.
Variable Speed EC (VSEC) motors require a

customer supplied 0-10V
signal.
TXV = Expansion Valve; LLSV = Liquid Line

Solenoid Valve
Molded fan guards are standard and ring fan

guards optional at no
additional cost.
Double Wall Insulated Pans, Stainless Steel

Cabinet & Pan, and Copper
Fin Coils are available. Contact your Sales

Representative or Account
Engineer for more information.
to add factory-installed options.
When ordering a configurable model, remember to

specify the
voltage and fan motor type.
Regulations Require EC or VSEC Motors!
Federal Energy Independence and Security Act of

2007 (H.R. 6)
Walk-Ins manufactured on or after 01/01/2009 and

under 3,000 square feet
in area with single phase evaporator fan motors

less than 1 HP and less than
460V must be EC motors.
California Energy Commission Title 24, Section 126
Effective 01/01/2010, refrigerated warehouses with

a total cold storage
and frozen storage area exceeding 3,000 square feet

with single phase
evaporator fan motors less than 1 HP and less than

460V must be variable
speed EC motors and controlled in response to space

conditions.
Bohn
Standard
Model
Bohn
Configurable
Model
List
Price
($US)
Factory-Installed Options List Price Adders ($US)
Electrical Options Mechanical
Options Coil Options
Beacon II
Assembly
Room
TSTAT TXV TXV &
LLSV BohnKote ElectroFin
Coil
BohnGuard
Fin Protection Bronz-Glow
Air Defrost Models with EC Motors - 208-230/1/60
- BMA130SA 4,283 2,220 291 552 840 1,221 Call

Factory 1,104 Call Factory
- BMA155SA 4,936 2,220 291 552 840 1,221 Call

Factory 1,104 Call Factory
- BMA245SA 7,387 2,220 291 552 840 Call Factory

Call Factory 1,164 Call Factory
- BMA300SA 9,055 2,220 291 552 840 Call Factory

Call Factory 1,164 Call Factory
- BMA365SA 11,516 2,220 291 741 1,190 Call Factory

Call Factory 1,227 Call Factory
- BMA450SA 13,396 2,220 291 741 1,190 Call Factory

Call Factory 1,227 Call Factory
- BMA510SA 15,919 2,220 291 741 1,190 Call Factory

Call Factory 1,282 Call Factory
- BMA600SA 16,741 2,220 291 741 1,190 Call Factory

Call Factory 1,282 Call Factory
- BMA710SA 19,281 2,220 291 1,074 1,649 Call

Factory Call Factory 1,315 Call Factory
Air Defrost Models with PSC Motors - 115/1/60
BMA130AA BMA130SA 3,579 2,220 291 552 840 1,221

Call Factory 1,104 Call Factory
BMA155AA BMA155SA 4,238 2,220 291 552 840 1,221

Call Factory 1,104 Call Factory
BMA245AA BMA245SA 5,986 2,220 291 552 840 Call

Factory Call Factory 1,164 Call Factory
BMA300AA BMA300SA 7,653 2,220 291 552 840 Call

Factory Call Factory 1,164 Call Factory
BMA365AA BMA365SA 9,408 2,220 291 741 1,190 Call

Factory Call Factory 1,227 Call Factory
BMA450AA BMA450SA 11,287 2,220 291 741 1,190 Call

Factory Call Factory 1,227 Call Factory
BMA510AA BMA510SA 13,114 2,220 291 741 1,190 Call

Factory Call Factory 1,282 Call Factory
BMA600AA BMA600SA 13,932 2,220 291 741 1,190 Call

Factory Call Factory 1,282 Call Factory
Air Defrost Models with PSC Motors - 208-230/1/60
BMA130BA BMA130SA 3,644 2,220 291 552 840 1,221

Call Factory 1,104 Call Factory
BMA155BA BMA155SA 4,297 2,220 291 552 840 1,221

Call Factory 1,104 Call Factory
BMA245BAF BMA245SA 6,109 2,220 291 552 840 Call

Factory Call Factory 1,164 Call Factory
BMA300BA BMA300SA 7,777 2,220 291 552 840 Call

Factory Call Factory 1,164 Call Factory
BMA365BA BMA365SA 9,599 2,220 291 741 1,190 Call

Factory Call Factory 1,227 Call Factory
BMA450BA BMA450SA 11,479 2,220 291 741 1,190 Call

Factory Call Factory 1,227 Call Factory
BMA510BA BMA510SA 13,363 2,220 291 741 1,190 Call

Factory Call Factory 1,282 Call Factory
BMA600BA BMA600SA 14,185 2,220 291 741 1,190 Call

Factory Call Factory 1,282 Call Factory
BMA710BA BMA710SA 16,086 2,220 291 1,074 1,649 Call

Factory Call Factory 1,315 Call Factory
55
Section 5 Section 1
Walk-In Unit Coolers
Medium Profile
Rev. 02/16 List Prices Effective February 15th,

2016. Prices and specifications subject to change

without notice.
Air Defrost Models & Options
When Do You Choose a
Configurable Model
Choose when there is not a standard model listed

or you want
Notes:
Beacon II must be ordered as a system.
Variable Speed EC (VSEC) motors require a