产品中心您的位置:网站首页 > 产品中心 > > 秒报价 > KemmerichGE550AC2000S整流桥秒报价

GE550AC2000S整流桥秒报价

更新时间:2016-12-26

访问量:686

厂商性质:其他

生产地址:德意美

简要描述:
Roller&Fischer D100 Nr397610 art no 020 003 0005 变送器
GE550AC2000S整流桥秒报价



手 机:

Kemmerich GE550AC2000S    整流桥
Kemmerich GB400 AC 2000S 整流桥




手 机:


GE550AC2000S整流桥秒报价30 - 150 4.4 53475-01
B1027C-CC Internal Pilot 1" 1-1/4" NO 30 - 150 30 - 150 4.4 53475-01
其他 Kemmerich GE550AC2000S    整流桥B1012H-CY External Pilot 1/2" 1/4" NO 0 - 150 30 - 150 2.22 53474-03
B1013H-CY External Pilot 1/2" 3/8" NO 0 - 150 30 - 150 2.22 53474-03
其他 Kemmerich GE550AC2000S    整流桥B1014H-CY External Pilot 1/2" 1/2" NO 0 - 150 30 - 150 2.22 53474-03
其他 Kemmerich GE550AC2000S    整流桥B1015H-CY External Pilot 1/2" 3/4" NO 0 - 150 30 - 150 2.22 53474-03
B1025H-CC External Pilot 1" 3/4" NO 0 - 150 30 - 150 4.4 53475-01
B1026H-CC External Pilot 1" 1" NO 0 - 150 30 - 150 4.4 53475-01
B1027H-CC External Pilot 1" 1-1/4" NO 0 - 150 30 - 150 4.4 53475-01
13_ Poppets Air_Sol 4th_11_ Poppets 1/31/11 3:08 PM Page 184
VAL-185
VALVES
Norgren.com/usa – 303.794.2611 – help@amer.norgren.com
Prospector Series Poppet Valves
1/4" to 2" Solenoid Pilot Actuated
2/2, 3/2, & 4/2 Inline Valves
* Repair Kit: Kits contain all elastomers necessary to service one valve body. ? External Pilot Supply: Pilot supply pressure must be equal to or greater than the operating pressure.
Solenoid pilot operated spring return inline valves with nonlocking
overrides, 120V, 60 Hz, and cablegrip connector
Model Solenoid Basic Port Function Operating Pressure Pilot Pressure? Weight Repair
3/2 (3 way) Size Size (psig) (psig) lbs. Kit*
Inline Valves
D1012B-CY Internal Pilot 1/4" 1/4" NC 30 - 150 30 - 150 1.91 53473-05
D1013B-CY Internal Pilot 1/4" 3/8" NC 30 - 150 30 - 150 1.91 53473-05
D1022C-CY Internal Pilot 1/2" 1/4" NC 30 - 150 30 - 150 2.5 53474-03
GE550AC2000S整流桥秒报价D1023C-CY Internal Pilot 1/2" 3/8" NC 30 - 150 30 - 150 2.5 53474-03
D1024C-CY Internal Pilot 1/2" 1/2" NC 30 - 150 30 - 150 2.5 53474-03
D1025C-CY Internal Pilot 1/2" 3/4" NC 30 - 150 30 - 150 2.5 53474-03
D1035C-CC Internal Pilot 1" 3/4" NC 30 - 150 30 - 150 4.49 53475-01
D1036C-CC Internal Pilot 1" 1" NC 30 - 150 30 - 150 4.49 53475-01
D1047C-CC Internal Pilot 1" 1-1/4" NC 30 - 150 30 - 150 4.49 53475-01
D1012H-CY External Pilot 1/4" 1/4" NC 0 - 150 30 - 150 1.91 53473-05
D1013H-CY External Pilot 1/4" 3/8" NC 0 - 150 30 - 150 1.91 53473-05
D1022H-CY External Pilot 1/2" 1/4" NC 0 - 150 30 - 150 2.5 53474-03
D1023H-CY External Pilot 1/2" 3/8" NC 0 - 150 30 - 150 2.5 53474-03
D1024H-CY External Pilot 1/2" 1/2" NC 0 - 150 30 - 150 2.5 53474-03
D1025H-CY External Pilot 1/2" 3/4" NC 0 - 150 30 - 150 2.5 53474-03
D1035H-CC External Pilot 1" 3/4" NC 0 - 150 30 - 150 4.49 53475-01
D1036H-CC External Pilot 1" 1" NC 0 - 150 30 - 150 4.49 53475-01
D1047H-CC External Pilot 1" 1-1/4" NC 0 - 150 30 - 150 4.49 53475-01
E1012B-CY Internal Pilot 1/4" 1/4" NO 30 - 150 30 - 150 1.91 53473-05
E1013B-CY Internal Pilot 1/4" 3/8" NO 30 - 150 30 - 150 1.91 53473-05
E1022C-CY Internal Pilot 1/2" 1/4" NO 30 - 150 30 - 150 2.5 53474-03
E1023C-CY Internal Pilot 1/2" 3/8" NO 30 - 150 30 - 150 2.5 53474-03
E1024C-CY Internal Pilot 1/2" 1/2" NO 30 - 150 30 - 150 2.5 53474-03
E1025C-CY Internal Pilot 1/2" 3/4" NO 30 - 150 30 - 150 2.5 53474-03
E1035C-CC Internal Pilot 1" 3/4" NO 30 - 150 30 - 150 6.49 53475-01
E1036C-CC Internal Pilot 1" 1" NO 30 - 150 30 - 150 4.49 53475-01
E1047C-CC Internal Pilot 1" 1-1/4" NO 30 - 150 30 - 150 4.49 53475-01
E1012H-CY External Pilot 1/4" 1/4" NO 0 - 150 30 - 150 1.91 53473-05
E1013H-CY External Pilot 1/4" 3/8" NO 0 - 150 30 - 150 1.91 53473-05
E1022H-CY External Pilot 1/2" 1/4" NO 0 - 150 30 - 150 2.5 53474-03
E1023H-CY External Pilot 1/2" 3/8" NO 0 - 150 30 - 150 2.5 53474-03
E1024H-CY External Pilot 1/2" 1/2" NO 0 - 150 30 - 150 2.5 53474-03
E1025H-CY External Pilot 1/2" 3/4" NO 0 - 150 30 - 150 2.5 53474-03
E1035H-CC External Pilot 1" 3/4" NO 0 - 150 30 - 150 6.49 53475-01
E1036H-CC External Pilot 1" 1" NO 0 - 150 30 - 150 4.49 53475-01
E1047H-CC External Pilot 1" 1-1/4" NO 0 - 150 30 - 150 4.49 53475-01
EXH IN
OUT
EXH IN
OUT
 B C
EXH IN
OUT
A
 B C
EXH IN
OUT
A
13_ Poppets Air_Sol 4th_11_ Poppets 1/31/11 3:08 PM Page 185
These models may be
used as Distributor,
Selector, Normally Open
or Normally Closed.
VAL-186
VALVES
Norgren.com/usa – 303.794.2611 – help@amer.norgren.com
Model* Solenoid Basic Port Operating Pressure Pilot Pressure** Weight Repair
3/2 (3-way) Size Size (psig) (psig) lbs. Kit?
multi-directional
C1012C-CY Internal Pilot 1/2" 1/4" 30 - 150 30 - 150 2.12 53474-03
C1013C-CY Internal Pilot 1/2" 3/8" 30 - 150 30 - 150 2.12 53474-03
C1014C-CY Internal Pilot 1/2" 1/2" 30 - 150 30 - 150 2.12 53474-03
C1025C-CY Internal Pilot 1/2" 3/4" 30 - 150 30 - 150 2.12 53474-03
C1035C-CC Internal Pilot 1" 3/4" 30 - 150 30 - 150 2.12 53475-01
C1036C-CC Internal Pilot 1" 1" 30 - 150 30 - 150 4.64 53475-01
C1037C-CC Internal Pilot 1" 1-1/4" 30 - 150 30 - 150 4.64 53475-01
C1048C-CC Internal Pilot 2" 1-1/2" 30 - 150 30 - 150 9.42 53822-01
C1049C-CC Internal Pilot 2" 2" 30 - 150 30 - 150 9.42 53822-01
C1012H-CY External Pilot 1/2" 1/4" 0 - 150 30 - 150 2.12 53474-03
C1013H-CY External Pilot 1/2" 3/8" 0 - 150 30 - 150 2.12 53474-03
C1014H-CY External Pilot 1/2" 1/2" 0 - 150 30 - 150 2.12 53474-03
C1025H-CY External Pilot 1/2" 3/4" 0 - 150 30 - 150 2.12 53474-03
C1035H-CC External Pilot 1" 3/4" 0 - 150 30 - 150 4.64 53475-01
C1036H-CC External Pilot 1" 1" 0 - 150 30 - 150 4.64 53475-01
C1037H-CC External Pilot 2" 1-1/4" 0 - 150 30 - 150 4.42 53475-01
C1048H-CC External Pilot 2" 1-1/2" 0 - 150 30 - 150 9.42 53822-01
C1049H-CC External Pilot 2" 2" 0 - 150 30 - 150 9.42 53822-01
C1052C-CY Internal Pilot 1/2" 1/4" 30 - 150 30 - 150 2.12 53474-03
C1053C-CY Internal Pilot 1/2" 3/8" 30 - 150 30 - 150 2.12 53474-03
C1054C-CY Internal Pilot 1/2" 1/2" 30 - 150 30 - 150 2.12 53474-03
C1065C-CY Internal Pilot 1/2" 3/4" 30 - 150 30 - 150 2.12 53474-03
C1088C-CC Internal Pilot 2" 1-1/2" 30 - 150 30 - 150 9.42 53822-01
C1089C-CC Internal Pilot 2" 2" 30 - 150 30 - 150 9.42 53822-01
4/2 (4 way)
F1012C-CY Internal Pilot 1/4" 1/4" 30 - 150 30 - 150 1.91 53477-06
F1013C-CY Internal Pilot 1/4" 3/8" 30 - 150 30 - 150 1.91 53473-05
F1023C-CY Internal Pilot 1/2" 3/8" 30 - 150 30 - 150 2.5 53474-06
F1024C-CY Internal Pilot 1/2" 1/2" 30 - 150 30 - 150 2.5 53474-06
F1025C-CY Internal Pilot 1/2" 3/4" 30 - 150 30 - 150 2.5 53474-06
F1035C-CC Internal Pilot 1" 3/4" 30 - 150 30 - 150 2.5 53475-06
F1036C-CC Internal Pilot 1" 1" 30 - 150 30 - 150 4.49 53475-06
F1037C-CC Internal Pilot 1" 1-1/4" 30 - 150 30 - 150 4.49 53475-06
F1012H-CY External Pilot 1/4" 1/4" 0 - 150 30 - 150 1.91 53477-06
F1013H-CY External Pilot 1/4" 3/8" 0 - 150 30 - 150 1.91 53473-05
F1023H-CY External Pilot 1/2" 3/8" 0 - 150 30 - 150 2.5 53474-06
F1024H-CY External Pilot 1/2" 1/2" 0 - 150 30 - 150 2.5 53474-06
F1025H-CY External Pilot 1/2" 3/4" 0 - 150 30 - 150 2.5 53474-06
F1035H-CC External Pilot 1" 3/4" 0 - 150 30 - 150 2.5 53475-06
F1036H-CC External Pilot 1" 1" 0 - 150 30 - 150 4.49 53475-06
F1037H-CC External Pilot 1" 1-1/4" 30 - 150 30 - 150 4.49 53475-06
Prospector Series Poppet Valves
1/4" to 2" Solenoid Pilot Actuated
2/2, 3/2, & 4/2 Inline Valves
* Operators have non-locking override and 110/120V 50/60 Hz coil
** External Pilot Supply: Pilot supply pressure must be equal to or greater than the operating pressure.
? Repair Kit: Kits contain all elastomers necessary to service one valve body.
Rating 90 - 105% Continuous Duty; and 85 - 105% for CC.
Power Requirements CC: 8 WDC, 8 WAC. CY: 6 WDC, 7 WAC. (See Options on VAL-12-13).
Electrical Connection CC: Form A per DIN 43650; CE, CF, CY: Industry Standard Form B per DIN 43650.
Manual Override Non-Locking (See Options on VAL-12-13)
Protection Class IP65 (NEMA 4) (See Options on VAL-12-13)
Coil Type Class H. Molded with 3-pin plug in connector. (See Options on VAL-12-13).
Plug Cable grips for cables 6 to 8 mm (1/4" to 5/16") in diameter.
Technical Details for Prospector Solenoid Pilot Operated Valves
Inline valves with non-locking override
OUT2 OUT1
A
IN
B C
Distributor
IN2 IN1
OUT
A
B C
Selector
CYL2 CYL1
IN EXH
4-Way
CYL2 CYL1
IN EXH
4-Way
13_ Poppets Air_Sol 4th_11_ Poppets 2/9/11 9:31 AM Page 186
VAL-187
VALVES
Norgren.com/usa – 303.794.2611 – help@amer.norgren.com
Voltage Options
Specify the desired valve model number (from pages 2, 3 or 5) and note the solenoid operator from the last 2 digits. Use the table below to obtain options
and add the desired option part number to the model number.
For example: order AA025C-00-CY1W4 for a 2-port/2-position, normally closed, internal pilot, Solenoid Pilot Operated spring return valve with non-locking
override using 24V/60Hz optional voltage.
Standard Solenoid Optional Solenoid Operator
Operators
VOLTAGE CC CE, CY CF* C0, C1 X1 P1
12V/60Hz/50Hz — 1W3 — — — —
24V/50Hz 1WC 1W4 1WJ — — 1PG
24V/60Hz 1WC 1W4 1WJ — — 1PH
48V/50Hz — 1W5 — — — —
48V/60Hz — 1W5 — — — 1PF
100V/50Hz — — — Standard Standard —
110V/50Hz Standard Standard 1WH — — Standard
120V/50Hz — — — 1RD 1NF —
120V/60Hz Standard Standard 1WH Standard Standard Standard
220V/50Hz 1WB 1W6 — — — 1PD
240V/60Hz 1WB 1W6 — 1R5 1NH 1PA
440V/50Hz — — — — — 1PE
480V/60Hz — — — — — 1PB
6VDC — — 1WK 1R1 1N7 —
12VDC 1WD 1W1 1WF 1R2 1NA —
24VDC 1WA 1W2 Standard 1R3 1ND —
110VDC — — 1WL — — —
* CF operator is equipped with fluorocarbon elastomer as standard.
Prospector Series Poppet Valves
1/4" to 2" Solenoid Pilot Actuated
2/2, 3/2, & 4/2 Inline Valves
Standard Solenoid Operators Optional Solenoid OperatorS
VOLTAGE CC CE, CY CF* C0, C1 X1 P1
12V/60Hz/50Hz — 54452-04 — — — —
24V/50Hz 40110-K40 54452-05 54469-04 — — 53761-32
24V/60Hz 40110-K40 — 54469-04 — — 53761-33
48V/50Hz — 54452-06 — — — —
48V/60Hz — 54452-06 — — — 53761-31
100V/50Hz — — — 53901-01 53902-01 —
110V/50Hz 40110-K38 54452-01 54469-03 — — 53761-28
120V/50Hz — — — 53901-07 53902-13 —
120V/60Hz 40110-K38 54452-01 54469-03 53901-01 53902-01 53761-28
220V/50Hz 40110-K39 54452-07 54452-07 — — 53761-29
240V/60Hz 40110-K39 54452-07 54452-07 53901-05 53902-14 53761-26
440V/50Hz — — — — — 53761-30
480V/60Hz — — — — — 53761-27
6VDC — — 54469-05 53901-02 53902-10 —
12VDC 40110-K41 54452-02 54469-01 53901-03 53902-11 —
24VDC 40110-K37 54452-03 54469-02 53901-04 53902-12 —
110VDC — — 54469-06 — — —
Replacement Coils
For replacement connectors and bases, please contact Technical Services.
* CF operator is equipped with fluorocarbon elastomer as standard.
13_ Poppets Air_Sol 4th_11_ Poppets 1/31/11 3:08 PM Page 187
VAL-188
VALVES
Norgren.com/usa – 303.794.2611 – help@amer.norgren.com
Prospector Series Poppet Valves
1/4" to 2" Air Pilot Actuated
2/2, 3/2, & 4/2 Inline Valves
High flow - Cv of 1.2 to 49.5
Durable, robust construction
Two mounting styles: inline or
subbase
1/4" to 2" ports (BSPP, PTF, or ISO
Rc threads)
Wide range of Air Pilot Operators
available
Four functional types: available in
2/2, 3/2, 3/2 multi-directional and
4/2 configurations
Technical Data
Medium:
Filtered and lubricated or nonlubricated
compressed air or vacuum.
Operation:
Poppet valve air pilot actuated.
Mounting:
Through-holes in valve body and
subbase.
Port Size:
1/4" to 2" PTF, BSPP, or ISO Rc.
Operating Pressure:
300 psig (Maximum 20.7 bar). For
details see overleaf.
Flow Characteristics:
Basicsize Function Cv*
1/4" 3/2 & 4/2 1.2 - 1.8
1/2" 2/2, 3/2 & 4/2 3.2 - 5.8
1" 2/2, 3/2 & 4/2 10.3 - 17.7
2" 2/2 & 3/2 39.6 - 49.5 *See VAL-12-58 for additional flow information.
Operating Temperature:
-20°F to 175°F** (-29°C to 79°C)
**Consult Technical Service for use below 35°F (+2°C).
Materials
Body: Aluminum alloy body, piston,
poppets and subbase.

4.10 (104.1)
2.06 (52.3)
3/4", 1", 1-1/4"
1.13 (28.7)
3/4", 1", 1-1/4"
3/4", 1", 1-1/4"
6.31 (160.3)
3.16 (80.2)
9.35 (237.5)
4.31 (109.5)
4.31 (109.5)
5.03 (127.8)
2.52 (64.0)
1-1/2", 2"
1-1/2", 2" 1-1/2", 2"
BOTTOM VIEW
BOTTOM VIEW
OPERATOR
Prospector Series Poppet Valves
2/2, 3/2, & 4/2 Inline Valves
Dimensions in inches (mm)
13_ Poppets Air_Sol 4th_11_ Poppets 1/31/11 3:09 PM Page 192
VAL-193
VALVES
Norgren.com/usa – 303.794.2611 – help@amer.norgren.com
4/2 Inline Bodies
Basic 1/4 - Inch Body F101*C
(4/2 Pilot Operated Valve)
1.75 (44.5)
.69 (17.5)
3.13 (79.5)
1.56 (39.6)
3.00 (76.2)
1.50 (38.1)
1.22 (31.1)
.66 (16.8) .84 (21.3)
1.15 (29.1)
1.84 (46.7)
.46 (11.7)
2.73 (69.3)
1/4", 3/8"
.59 (15.0)
1/4", 3/8"
3/8", 3/8"
Basic 1/2 - Inch Body F102*C
(4/2 Pilot Operated Valve)
1.50 (38.1)
3.00 (76.2)
3.75 (95.3)
2.00 (50.8)
A
1.69 (42.9)
1.75 (44.5)
1.94 (49.3)
.88 (22.4)
.75 (19.1)
2.75 (69.9)
1.63 (41.4)
3.00 (76.2)
.34 (8.6) Dia. (2 plcs)
3.94 (100.1)
.38 (9.7) TYP
3/8", 1/2", 3/4"
1/2", 3/4", 3/4"
.88 (22.4)
3/8", 1/2", 3/4"
Basic 1 - Inch Body F103*C
(4/2 Pilot Operated Valve)
2.25 (57.2)
4.00 (101.6)
4.50 (114.3)
2.50 (63.5)
.38 (9.7) TYP
5.00 (127.0)
1.25 (31.8) 2.50 (63.5) 3.49 (88.6)
6.23 (158.2)
1.75 (44.5)
3.50 (88.9)
1.44 (36.6)
.41 (10.4)
Dia. (2 plcs)
3.49 (88.6)
2.24 (56.9) 2.50 (63.5)
3/4", 1", 1-1/4" 3/4", 1", 1-1/4"
1", 1-1/4", 1-1/4"
TOP VIEW
TOP VIEW
Prospector Series Poppet Valves
2/2, 3/2, & 4/2 Inline Valves
Dimensions in inches (mm)
13_ Poppets Air_Sol 4th_11_ Poppets 1/31/11 3:09 PM Page 193
Prospector Series Poppet Valves
2/2, 3/2, & 4/2 Inline Valves
VAL-194
VALVES
Norgren.com/usa – 303.794.2611 – help@amer.norgren.com
Valve Body Operator with Standard Cable Grip Connector
CC CE, CF, CY
3.00 (76) Dia.
3.30 (84)*
Exhaust Diffuser
Manual Override
1/8" NPT External
Pilot Port
*Gasket 0.03 (0.8) thick included in dimensions
3.00 (76) Dia.
2.93 (74)
3.18 (81)*
Manual Override
1/8" - 27 NPT
External
Pilot Port
1/8" Solenoid Exhaust 1.29 (33)
4.41 (112)
0.79 (20)
1.97 (50)
Dimensions in inches (mm)
* Gasket 0.03 (0.8) thick included in dimensions.
Optional C Series
Conduit Housing
C0, C1
1.59 (40.4)
Conduit Port 1/2" NPT
.32 (7.9)
Manual Override Locking
External Pilot Port 1/8" NPTF
3.00 (76 2. ) 2.06 (52 3. )
3.09 (78.5)* .34 (8.6)
Optional P Series .94 (23.9)
3.00 (76.2) Dia.
External Pilot Port
 1/8" NPTF
.62 (15.7) Aux. Outlet - 1/8" NPTF
(Can be used for operating
additional remote valve.)
1.87 (47.5)
4.03 (102.4) AC Oper.
.36 (9.1)
Conduit Port
1/2" NPSM
Exhaust Port
1/8" NPTF
(Do Not Restrict)
P1
Valve Body Operator Dimensions with Optional X Series - Hazardous Location
X1
1.66 (42.2)
Conduit Port
1/2" NPT
3.00 (76.2)


.31 (7.9)
Manual Override - Locking
External Pilot Port
1/8" NPTF
Exhaust Port
1/4" NPT
4.22 (107.2)
2.36 (59.9)
.34 (8.6)*
Solenoid housings can be rotated 360°
* Gasket 0.03 (0.8) thick included in dimensions.
13_ Poppets Air_Sol 4th_11_ Poppets 1/31/11 3:09 PM Page 194
VAL-195
VALVES
Norgren.com/usa – 303.794.2611 – help@amer.norgren.com
Adjustable delay, up to 50 seconds
Time delays available in two
functional models for 0 to 5 and 0 to
60 second delays
Time Delay on Operate and Time
Delay on Release, normally open and
normally closed available
Can be used in conjunction with
most Norgren Poppet valves
Prospector Series Poppet Valves
Smooth Start Valves and TIme Delay Options
Technical Data
Medium
3-Port/2-Position Time Delays: Filtered,
nonlubricated dry compressed air.
Other Time Delays: Filtered (5-micron),
nonlubricated, dry compressed air at
a constant pressure and temperature.
The finer the filtration and the closer
the regulation, the better the accuracy
and repeatability of the time delay.
Mounting
Through-holes in valve body, inline, or
on valve.
Port Size
3-Port/2-Position Time Delays: 1/4"
PTF, BSPP, or ISO Rc.
Operating Pressure Range
3-Port/2-Position Time Delays: 30 to
150 psig (2.1 to 10.3 bar).
Other Time Delays: Equal to or greater
than main valve inlet pressure but not
less than 30 psig (2.1 bar) and not
greater than 150 psig (10.3 bar).
Operating Temperature
All Time Delays: 35°F to 130°F (2°C to
54°C).
Consult Technical Service for use below 35°F (+2°C).
Materials
Body: Aluminum alloy body, acetal, or
aluminum check valve, stainless steel
adjusting screw.
Elastomers: Nitrile rubber seals.
3-Port/2-Position Time Delay Valves
Symbol Type Port Cv Factor Model Weight
Size In to Out Ports Out to Exhaust Ports lbs (kg)
Normally Closed,
Time Delay on 1/4" 0.15 0.16 Z0002A 2.06
Operate (TDO) (0.94)
Normally Open,
Time Delay on 1/4" 0.16 0.09 Z0003A 2.06
Operate (TDO) (0.94)
Norgren Time Delay Valves consist of a 0 to 60 second time delay fitted with an A1 air operator and a special bottom cap with
IN and OUT ports. They are used to provide delayed actuation or release of valves or other pneumatic devices that do not
require large air flows.
* Thread: Insert 4 for BSPP; 1 for PTF; or 6 for ISO Rc.
EXH
EPS
IPS MV
SIG

EXH
EPS
IPS MV
SIG

Adjustment Screw
External Pilot Supply Port
1/8" NPTF
3.06 (78)
2.13 (54) 1.53 (39)
Exhaust Port
1/8" NPTF
Do Not
Restrict
External Cavity Port
1/8" NPTF
Model 23 and 24
Typical all models
3.06
(78)
Model 22
13_ Poppets Air_Sol 4th_11_ Poppets 1/31/11 3:09 PM Page 195
VAL-196
VALVES
Norgren.com/usa – 303.794.2611 – help@amer.norgren.com
0 to 5 Second Time Delays, & 0 to 60 Second Time Delays - Standard Applications and Special Applications
For Use With Air and Solenoid Operated Poppet Valves
Most Norgren solenoid and air operated poppet valves can be equipped with an adjustable 0 to 5 or 0 to 60 second time delay. Both
available in two functional models.
(1) Time Delay on Operation (TDO), which delays shifting of the main valve poppet on application of the pilot signal, and releases the
poppet immediay upon removal of the signal, and
(2) Time Delay on Release (TDR), which shifts the main valve poppet immediay upon the application of the pilot signal, and delays
release of the poppet on removal of the signal.
Norgren Air Pilot Operated Poppet Valves can be equipped with a Special Application 0 to 60 second One Shot Model, which shifts
the main poppet respectively upon application of the pilot signal and releases the poppet after the time delay period is completed.
Ordering Information
Use only with valves as defined in the following diagram.
To order valves with a time delay, note the desired valve model number from previous pages in Section 10. Insert
the desired time delay model number in the 7th and 8th positions of the valve model number as shown in the
following diagram. For example: for a 4-Port/2-Position Air Pilot Operated Inline valve, F1024C-00-A1, with a 0
to 5 Second Time Delay on release order: F1024C-02-A1.
For 0 to 5 second time delay - DO NOT USE WITH 2" basic valves.
For 0 to 60 second ONE SHOT SPECIAL APPLICATION - DO NOT USE WITH 3-way twin valves.
NOTES:
* Valves with an internal pilot supply are identified by a C in the 6th position of the model number. See Figure 1(on following page) for installation.
ALTERNATE CONFIGURATION - MODE - 23 ONE SHOT TIME DELAY: The Alternate Configuration of Model 23 Time Delay (see next page
for description) requires an unrestricted internal pilot supply passage. Select the desired valve model number as described above, then
change the 6th position of the model number to B, i.e. D1022B-23-A1, when ordering Model 23 Alternate Configuration. See figure 1 for installation.
When used with valves that have an external pilot supply (designated by an H or J in the 6th position of the valve model number), the pilot
supply must be connected to the operator (Figure 2). Zero to five second time delays do not have an external pilot supply port.
** An adjustment screw provides an adjustment range of 0 to 5 or 0 to 60 seconds.
For 0 to 60 second only this range can be extended by increasing the volume of the time delay cavity in the timer body. A port is provided in
the body for connecting an additional external cavity which can consist of a short length of pipe (capped at one end) or other similar air receiver.
Increasing the cavity an additional 29.5 cubic cm., (1.8 cubic inches) will roughly double the delay time for the same adjustment screw setting.There must be
an A, B, C, D, E, or F in the 1st position of the desired valve model number.
There must be an A, B,
C, D, E, or F in the 1st
position of the desired
valve model number.
There must be a C, H,
or J in the 6th position
of the desired valve
model number.*
Position in Model Number
1 2 3 4 5 6 7 8 9 10
0 0
Time Delay Models** Weight
lbs. (kg)
0 1 0 to 5 Second 0.68
Time delay on operate. (0.31)
0 2 0 to 5 Second 0.68
Time delay on release. (0.31)
0 to 60 Second 0.95
0 3 Time delay on operate; (0.43)
Normally closed.
0 to 60 Second 0.95
0 4 Time delay on release; (0.43)
Normally closed.
0 to 60 Second 0.95
2 3 One Shot Time delay; (0.43)
Normally open.
For 0 to 60 Second, One Shot Models, there must be an A1 or
AA in the 9th and 10th position of the desired model number.
Prospector Series Poppet Valves
Smooth Start Valves and TIme Delay Options
13_ Poppets Air_Sol 4th_11_ Poppets 1/31/11 3:09 PM Page 196
VAL-197
VALVES
Norgren.com/usa – 303.794.2611 – help@amer.norgren.com
Pilot Air Supply
The pilot air supply to the time
delay must be filtered and
regulated as described under
Medium. For best timer
performance, the installation
shown in Figure 2 is
recommended. Connect the external pilot supply to the operator.
The time delay will also be supplied from this connection.
Figure 2. External Pilot Supply
Figure 1. Internal Pilot Supply
Regulator
5-Micron
Filter
Operator
Timer
Main
Valve
Other
Source 5-Micron
Filter
Operator
Timer
Main Regulator Lubricator Valve
N
0 to 5 Second Time Delays, & 0 to 60 Second Time Delays - Standard Applications Cont.
Graphic Symbols and Timing Sequences
SIG — Pilot Signal EXH — Exhaust REL — Released (Deactuated) — Port/Passage Plugged
IPS — Internal Pilot Supply MV — Main Valve (Piston) IN PR — Inlet Pressure (Main Valve) — Passage Blocked
EPS — External Pilot Supply (Shown Plugged) ACT — Actuated
IPS MV
SIG
ON
OFF
ACT
REL MV
SIG
(0 to 5 Seconds)
TDR
1. No pilot signal - main valve released.
2. Pilot signal applied - main valve actuates after the
time delay period (TDO) is completed and remains
actuated so long as the pilot signal is sustained.
3. Pilot signal removed - main valve released
immediay.
1. No pilot signal - main valve released.
2. Pilot signal applied - main valve actuates
immediay and remains actuated so long as the
pilot signal is sustained.
3. Pilot signal removed - main valve releases after
the time delay period (TDR) is completed.
Model 01 - Time Delay on Operate (TDO) Model 02 - Time Delay on Release (TDR)
1. No pilot signal - main valve released.
2. Pilot signal applied - main valve actuates after the
time delay period (TDO) is completed and remains
actuated so long as the pilot signal is sustained.
3. Pilot signal removed - main valve released
immediay.
Model 03 - Time Delay on Operate (TDO)
Normally Closed
EXH
EPS
IPS MV
SIG
 ON
OFF
ACT
REL MV
SIG
(0 to 60
Seconds)
TDO
IPS MV
SIG
ON
ACT
REL MV
SIG
(0 to 5 Seconds)
TDO
1. No pilot signal - main valve released.
2. Pilot signal applied - main valve actuates
immediay, then releases after the time delay period
(one shot) is completed and remains released.
3. Pilot signal removed - main valve remains released.
EXH
MV
SIG
ON
OFF
ACT
REL MV
SIG
(0 to 60
Seconds)
ONE
SHOT
N
Model 23 One Shot, Normally Open
Standard Configuration
1. Main valve inlet pressurized - main valve actuates
immediay, then releases after the time delay
period (one shot) is completed and remains released.
2. Main valve inlet pressure reduced to zero psig -
main valve remains released.
Model 23 One Shot, Normally Open
Alternate Configuration
EXH
MV
SIG
ON
OFF
ACT
REL MV
SIG
(0 to 60
Seconds)
TDO
N
1. No pilot signal - main valve released.
2. Pilot signal applied - main valve actuates
immediay and remains actuated so long as the pilot
signal is sustained.
3. Pilot signal removed - main valve releases after the
time delay period (TDR) is completed.
Model 04 - Time Delay on Release (TDR)
Normally Closed
EXH
EPS
IPS MV
SIG
ON
OFF
ACT
REL MV
SIG
(0 to 60
Seconds)
TDR
Internal pilot supply Shut off air supply to main valve. Cycle valve operator until trapped air is exhausted from the main valve piston chamber, operator, and time delay. You may also install a 2-way vent
valve on the external pilot supply port.
External pilot supply Shut off air supply to main valve and the pilot supply. Cycle the valve operator until the trapped air is exhausted. You may also install a 2-way vent valve on external pilot supply line.
Prospector Series Poppet Valves
Smooth Start Valves and TIme Delay Options
13_ Poppets Air_Sol 4th_11_ Poppets 1/31/11 3:09 PM Page 197
VAL-198
VALVES
Norgren.com/usa – 303.794.2611 – help@amer.norgren.com
2-Port/2-Position
These 2-way valves have an inlet and outlet port and are used as shutoff valves
that open or close an air line. They are available in normally closed or normally
open models. The normally closed model blocks flow when in its normal position,
and permits flow when it is actuated. The normally open model permits flow when
in its normal position, and blocks flow when actuated. Typical applications include
on-off control of main plant air, air to branch lines, systems and air motors.
Flow Diagrams
3-Port/2-Position
These 3-way valves have an inlet, outlet, and exhaust port and are typically
used to pressurize and then exhaust air from such devices as single-acting
cylinders. They are available in normally closed or normally open models. The
normally closed model exhausts air from the device when in its normal position,
and pressurizes the device when actuated. The normally open model pressurizes
the device when in its normal position and exhausts air from the device when
actuated.
The normally closed valve is available with two options: a position indicator pin
and an air or solenoid momentary signal operator. The indicator pin can be used to
operate a switch or other device to provide a signal for a control circuit. The
momentary signal operator is used when it is desirable to control the valve with
two alternay applied momentary signals (first signal shifts and holds the poppet;
the second allows the poppet to return to its normal position).
Flow Diagrams
NORMAL ACTUATED
Normally
Closed
Normally
Open
Normally
Closed
Normally
Open
NORMAL ACTUATED
Inlet Blocked Pressure to OUT Port
3-Port/2-Position (Multi-Directional)
These 3-way valves can be used in four different ways
— as a distributor, directing air first to one port, then to
another; as a selector, directing first high, then low
pressure air (or vacuum) to the same outlet; as a standard
3-port/2-position normally closed valve; and as a standard
3-port/2-position normally open * valve. Multi-directional
valves are the only poppet valves with which speed
controls can be installed in the exhaust port.
Flow Diagrams
NORMAL ACTUATED
Distributor
Normally
Closed
Normally
Open *
* Normally open valves require an external pilot supply.
Pressure to OUT Port Inlet Blocked
Pressure to Port A Inlet Blocked
Inlet Blocked Pressure to Port A
Pressure C to Port A Pressure B to Port A
Pressure to Port C Pressure to Port B
Inlet Blocked Pressure to Port B
Pressure to Port B Inlet Blocked
A
(IN)
B (OUT) A
(IN)
B
(OUT)
A
(IN)
B
(OUT) A
(IN)
B
(OUT)
IN
OUT
EXH
IN
OUT
EXH
IN
OUT
EXH
IN
OUT
EXH
A
(IN)
B
(OUT)
C (OUT 1)
A
(IN)
B
(OUT 2)
C (OUT 1)
B
(IN 2)
A (OUT)
C (IN 1)
B
(IN 2)
A (OUT)
C (IN 1)
B
(IN)
A
(OUT)
C (EXH)
B
(IN)
A
(OUT)
C (EXH)
B
(EXH)
A
(OUT)
C (IN)
B
(EXH)
A
(OUT)
C (IN)
Prospector Series Poppet Valves
Valve types
Selector
(Two
Pressure)
13_ Poppets Air_Sol 4th_11_ Poppets 1/31/11 3:09 PM Page 198
VAL-199
VALVES
Norgren.com/usa – 303.794.2611 – help@amer.norgren.com
4-Port/2-Position (4-Way)
This 4-way valve has a normally closed and a normally
open 3-way valve element in a common body. Both
elements are actuated simultaneously by a single operator.
The valve body has an inlet, exhaust, and two outlet ports.
In the normal position, pressurized air is directed to one
outlet port and air is exhausted from the second outlet port.
In the actuated position, the connections are reversed.
Typical applications include control of double acting
cylinders and reversible air motors.
This valve is available with an optional air or solenoid
momentary signal operator. Momentary signal operators
are used when it is desirable to control the valve with two
alternay applied momentary signals. The first signal
shifts and holds the valve poppets in the actuated position;
the second allows the poppets to return to the normal
position.
Flow Diagrams with Single and Momentary Signal
Operator
The 4-port/2-position (4-way) valve is also available
with an optional air or solenoid twin operator, which allows
independent operation of each valve element.
Flow Diagrams with Twin Operator
NORMAL ACTUATED
A & B NORMAL A ACTUATED
B ACTUATED A & B ACTUATED
4-Port/2-Position (3-Way Twin, Normally Closed)
This 3-way twin valve has two normally closed 3-way valve elements in a
common body. Each element is capable of independent actuation by an air or a
solenoid operator. The valve body has an inlet, exhaust, and two outlet ports. In
the normal position, pressurized air is blocked at the inlet port and air is exhausted
from both outlet ports. It functions the same as two 3-port/2-position valves but
provides greatly simplified plumbing and reduced package size.
NOTE
This valve may be used as a 3-position, 4-way, spring centered valve with
cylinder ports open to exhaust in centered or normal position.
Flow Diagrams
A & B NORMAL A ACTUATED
B ACTUATED A & B ACTUATED
Cylinders Open to Exhaust Inlet Open to Cyl. 1
Cyl. 2 Open to Exh.
Inlet Open to Cyl. 2 Inlet Open to Cylinders
Cyl. 1 Open to Exh.
Cylinders Open to Exhaust Inlet Open to Cyl. 1
Cyl. 2 Open to Exh.
Inlet Open to Cyl. 2 Inlet Open to Cylinders
Cyl. 1 Open to Exh.
Inlet Open to Cyl. 2 Inlet Open to Cyl. 1
Cyl. 1 Open to Exh. Cyl. 2 open to Exh.
CYL
1
IN
CYL
2
EXH
CYL
1
IN
CYL
2
EXH
CYL
1
IN
CYL
2
EXH
CYL
1
IN
CYL
2
EXH
CYL
1
IN
CYL
2
EXH
CYL
1
IN
CYL
2
EXH
CYL
1
IN
CYL
2
EXH
CYL
1
IN
CYL
2
EXH
N
CYL
1
IN
CYL
2
EXH
CYL
1
IN
CYL
2
EXH
N
Prospector Series Poppet Valves
Valve types
13_ Poppets Air_Sol 4th_11_ Poppets 1/31/11 3:09 PM Page 199
VAL-200
VALVES
Norgren.com/usa – 303.794.2611 – help@amer.norgren.com
Basic Port
Valve Type Size Size Average Cv Factor
2-Port/2-Position Normally Closed Models Normally Open Models
A to B Ports A to B Ports
1/2" 1/4" 2.1 2.3
3/8" 3.4 3.8
1/2" 5.3 5.4
3/4 6.5 6.3
1" 3/4" 10.7 12.0
1" 13.5 15.4
1-1/4" 16.3 17.9
2" 1-1/2" 34.0 —
2" 39.6 —
3-Port/2-Position Normally Closed Models Normally Open Models
In to Out Ports Out to Exh Ports In to Out Ports Out to Exh Ports
Basic 1/4" 1/4" 1.5 1.8 1.5 1.8
3/8" 1.7 1.8 1.7 1.8
Basic 1/2" 1/4" 2.7 3.9 2.0 3.6
3/8" 3.6 4.9 3.1 4.6
1/2" 4.6 5.8 4.1 5.5
3/4" 5.4 6.2 4.9 5.8
Basic 1" 3/4" 11.2 13.3 10.6 12.8
1" 13.2 14.6 11.7 13.8
1-1/4" 16.6 18.4 12.0 15.5
3-Port/2-Position Multi-Directional A to C Ports A to B Ports C to A Ports B to A Ports
1/2" 1/4" 2.5 2.0 2.3 2.1
3/8" 4.0 2.7 3.7 2.9
1/2" 5.7 3.4 4.7 4.0
3/4" 6.1 4.0 5.2 4.4
1" 3/4" 14.8 10.3 13.4 11.1
1" 17.7 13.2 14.0 14.1
1-1/4" 18.3 14.0 14.6 16.5
2" 1-1/2" 44.8 33.1 41.2 35.6
2" 49.5 40.0 46.1 42.8
4-Way 3-Way Twin, Normally Closed
4-Port/2-Position (Inline Valves) In to Cyl 2 Cyl 1 to Exh In to Cyl 1 Cyl 2 to Exh
In to Cyls 1 & 2 Cyls 1 & 2 to Exh
1/4" 1/4" 1.2 1.6 1.2 1.6
3/8" 1.4 1.6 1.4 1.6
1/2" 3/8" 3.0 4.5 3.1 4.3
1/2" 4.0 5.4 4.1 5.1
3/4" 4.8 5.8 5.0 5.4
1" 3/4" 10.3 13.1 11.0 12.5
1" 11.3 14.3 12.9 13.4
1-1/4" 11.6 14.5 14.3 13.7
All Subbase Valves In to Cyl 1 Port In to Cyl 2 Port Cyl 1 to Exh Port Cyl 2 to Exh Port
1/2" 1/4" 1.8 2.0 3.4 3.2
3/8" 2.7 3.0 3.7 3.7
1/2" 3.2 3.6 4.7 4.7
3/4" 3.5 3.9 4.7 4.7
1" 3/4" 10.0 9.0 12.0 10.5
1" 11.9 10.3 12.7 11.1
1-1/4" 13.0 11.1 13.0 11.3
Type Ports
Distributor A to C &
A to B
Selector C to A &
B to A
N.C. A to C &
B to A
N.O. C to A &
A to B
Flow (Cv) Factors. Flow ratings determined in accordance with ANSI (NFPA) T3.21.3,
Pneumatic fluid power - Flow test procedure and reporting method - for fixed orifice components.
Prospector Series Poppet Valves
13_ Poppets Air_Sol 4th_11_ Poppets 1/31/11 3:09 PM Page 200
VAL-201
VALVES
Norgren.com/usa – 303.794.2611 – help@amer.norgren.com
Repair Kits and Factory Installed Fluorocarbon Elastomers
? When requesting repair kits or information for your valve, give both main valve and operator model numbers exactly as found on their respective nameplates.
? Repair Kits - Repair kits contain all elastomers necessary to service one valve body, operator, or time delay. Order the appropriate valve body, operator, and time delay
repair kit as required to service your valve.
? Valve Bodies and Operators with Factory Installed Fluorocarbon Elastomers - Valve bodies and some operators are available with fluorocarbon elastomers for use when
contaminants in the air system are incompatible with the standard nitrile elastomers. To order valves with fluorocarbon elastomers, specify the desired valve model
number (from the preceding pages plus the Order With numbers given below. Be sure to specify the Order With number for the valve body and the Order With number for
the operator. Fluorocarbon elastomers are not available on Time Delays, on the A6 Air Operator, or on the standard C Series Solenoid Operators.
Order With
Repair Kit Factory Installed
Fluoro- Fluorocarbon
Type Internal Variation Nitrile carbon Elastomer
A101 B, C, E, F, H, J, K 53474-03 53474-14 53474-21 1EE
A102 B, C, E, F, H, J, K 53475-01 53475-07 53475-13 1F2
A103 B, C, H, J 53822-01 53909-01 53909-03 1F8
B101 B, C, E, F, H, J, K 53474-03 53474-14 53474-21 1EE
B102 B, C, E, F, H, J, K 53475-01 53475-07 53475-13 1F2
C101 B, C, E, F, H, J, K 53474-03 53474-08 53474-15 1E8
C102 B, C, E, F, H, J, K 53474-03 53474-08 53474-15 1E8
C103 B, C, E, F, H, J, K 53475-01 53475-07 53475-13 1F2
C104 B, C, H, J 53822-01 53909-02 53909-04 1F9
C105 B, C, E, F, H, J, K 53474-03 53474-08 53474-15 1E8
C106 B, C, E, F, H, J, K 53474-03 53474-08 53474-15 1E8
C108 B, C, H, J 53822-01 53909-02 53909-04 1F9
D101 B, E, F, H, K 53473-05 53473-06 53473-11
D102 B, C, E, F, H, J, K 53474-03 53474-09 53474-16 1E9
D103 B, C, E, F, H, J, K 53475-01 53475-08 53475-14 1F2
D104 B, C, E, F, H, J, K 53475-01 53475-08 53475-14
D107 B, C, F, H, J 53474-03 53474-24 53474-23
D108 B, C, F, H, J 53475-01 53475-22 53475-21
E101 B, F, H 53473-05 53473-07 53473-12
E102 B, C, F, H, J 53474-03 53474-10 53474-17 1EA
E103 B, C, F, H, J 53475-01 53475-09 53475-15
E104 B, C, F, H, J 53475-01 53475-09 53475-15
F101 B, C, E, H, K 53473-05 53473-08 53473-13 1E5
F101 F 53473-16 53473-08* 53473-13
F102 B, C, E, H, J, K 53474-06 53474-11 53474-18 1EB
F102 F 53474-25 53474-11* 53474-18
F103 B, C, E, H, J, K 53475-06 53475-10 53475-16
F103 F 53475-25 53475-10* 53475-16
F221 B, C, E, H, J, K 53474-06 53474-11 53474-18
F221 F 53474-25 53474-11* 53474-18
F222 B, C, E, H, J, K 53475-06 53475-10 53475-16
F222 F 53475-25 53475-10* 53475-16
F223 B, C, E, H, J, K 53474-06 53474-11 53474-18
F223 F 53474-25 53474-11* 53474-18
F224 B, C, E, H, J, K 53475-06 53475-10 53475-16
F224 F 53475-25 53475-10* 53475-16
F323 B, C, E, H, J, K 53474-06 53474-11 53474-18
F323 F 53474-25 53474-11* 53474-18
F324 B, C, E, H, J, K 53475-06 53475-10* 53475-16
F324 F 53475-25 53475-10* 53475-16
G102 B, C, E, H, J, K 53474-06 53474-12 53474-19 1EC
G102 F 53474-25 53474-12* 53474-19 1EC
G103 B, C, E, H, J, K 53475-06 53475-11 53475-17
G103 F 53475-25 53475-11* 53475-17
Position in Model Number
VALVE BODY TIME DELAY OPERATOR
A 1 0 1 2
43 5
C
21 6
A 1
109
0 0
87
Order With
Repair Kit** Factory Installed
Fluoro- Fluorocarbon
Type Nitrile carbon Elastomer
A1 None Used None Used None Used
A4 None Used None Used None Used
A6 53476-01 — —
CC — — —
CE — — —
CF — — Standard ??
CN — — —
CP — — —
CR — — —
CS — — —
CT — 53478-13 Standard ??
CU — — —
CV — — —
CW — — —
CY — — —
CZ — — Standard ??
C0 53478-01 53478-13 53478-20
C1 53478-01 53478-13 53478-20
C2 53478-04 53478-13 53478-25
C3 53478-04 53478-13 53478-25
C4 53478-01 53478-13 53478-20
C8 53478-01 53478-13 53478-20
DA — — Standard ??
D0 ? 53478-02 53478-14 53478-24
D1 ? 53478-02 53478-14 53478-24
D2 ? 53478-05 53478-16 53478-26
D3 ? 53478-05 53478-16 53478-26
D4 ? 53478-01 53478-13 53478-20
D5 ? 53478-01 53478-13 53478-20
D6 ? 53478-04 53478-15 53478-25
D7 ? 53478-04 53478-15 53478-25
D8 ? 53478-04 53478-15 53478-25
E1 53478-01 53478-13 53478-20
E3 53478-04 53478-15 53478-25
E8 53478-01 53478-13 53478-20
F4 ? 53478-02 53478-14 53478-24
F5 ? 53478-05 53478-16 53478-26
F6 ? 53478-01 53478-13 53478-20
F7 ? 53478-04 53478-15 53478-25
M Series 53769-01 53769-02 53769-03
P Series 54853-01 NA NA
X0 53478-07 53478-17 53478-19
X1 53478-07 53478-17 53478-19
X2 ? 53478-08 53478-18 53478-28
X3 ? 53478-08 53478-18 53478-28
X4 ? 53478-07 53478-17 53478-19
X5 ? 53478-07 53478-17 53478-19
Repair Kit
(Nitrile
Type Only)
01 53477-01
02 53477-01
03 53477-03
04 53477-03
05 Top 53477-01
05 Bottom 53477-03
09 53477-03
10 53477-03
22 Top 53477-03
22 Bottom 53477-03
23 53477-03
24 53477-03
* Order Gasket 53045-02 when ordering fluorocarbon repair kits for valves with internal variation F.
** Solenoid operator repair kits do not include coils.
? Order two kits to service these operators.
?? The CF, CT, CZ, and DA operators are equipped with fluorocarbon elastomers.

Operators: Zinc or aluminum air pilot
operators.
Elastomers: Nitrile rubber seals.
(Fluorocarbon seals are optional,
contact Technical Services.)
3-Port/2-Position Multi-Directional
3-Port/2-Position
4-Port/2-Position 3-Way Twin
Normally Closed
4-Port/2-Position
4-Way
2-Port/2-Position
IN
OUT
EXH
This example shows a 3-way normally closed valve.
OUT
B
A
IN
Normally Open
N
OUT
B
A
IN
Normally Closed
 IN
O
EXH IN
OUT
Normally Closed
N
EXH IN
OUT

Normally Open
OUT2 OUT1
A
IN
B C
Distributor
CYL 1IN
EXH CYL2
IN2 IN1
OUT
A
B C
Selector
EXH IN
OUT
A
C B
Normally Closed
EXH IN
OUT
A
B C
Normally Open
CYL2 CYL1
IN EXH
13_ Poppets Air_Sol 4th_11_ Poppets 1/31/11 3:08 PM Page 188
VAL-189
VALVES
Norgren.com/usa – 303.794.2611 – help@amer.norgren.com
Model Basic Size Port Function Operating Pressure Pilot Pressure* Weight Repair
2/2 (2 way) Size (psig) (psig) lbs. Kit?
A1012C-A1 1/2" 1/4" NC 0 - 300 30 -300 1.51 53474-03
A1013C-A1 1/2" 3/8" NC 0 - 300 30 -300 1.51 53474-03
A1014C-A1 1/2" 1/2" NC 0 - 300 30 -300 1.51 53474-03
A1015C-A1 1/2" 3/4" NC 0 - 300 30 -300 1.51 53474-03
A1025C-A1 1" 3/4" NC 0 - 300 30 -300 3.69 53475-01
A1026C-A1 1" 1" NC 0 - 300 30 -300 3.69 53475-01
A1027C-A1 1" 1-1/4" NC 0 - 300 30 -300 3.69 53475-01
A1038C-A1 2" 1-1/2" NC 0 - 300 30 -300 8.05 53822-01
A1039C-A1 2" 2" NC 0 - 300 30 -300 8.05 53822-01
B1012C-A1 1/2" 1/4" NO 0 - 300 30 -300 1.51 53474-03
B1013C-A1 1/2" 3/8" NO 0 - 300 30 -300 1.51 53474-03
B1014C-A1 1/2" 1/2" NO 0 - 300 30 -300 1.51 53474-03
B1015C-A1 1/2" 3/4" NO 0 - 300 30 -300 1.51 53474-03
B1025C-A1 1" 3/4" NO 0 - 300 30 -300 3.69 53475-01
B1026C-A1 1" 1" NO 0 - 300 30 -300 3.69 53475-01
B1027C-A1 1" 1-1/4" NO 0 - 300 30 -300 3.69 53475-01
3/2 (3 way)
D1012H-A1 1/4" 1/4" NC 0 - 300 30 - 300 1.2 53474-05
D1013H-A1 1/4" 3/8" NC 0 - 300 30 - 300 1.2 53474-05
D1022C-A1 1/2" 1/4" NC 0 - 300 30 - 300 1.79 53474-03
D1023C-A1 1/2" 3/8" NC 0 - 300 30 - 300 1.79 53474-03
D1024C-A1 1/2" 1/2" NC 0 - 300 30 - 300 1.79 53475-03
D1025C-A1 1/2" 3/4" NC 0 - 300 30 - 300 1.79 53475-03
D1035C-A1 1" 3/4" NC 0 - 300 30 - 300 3.78 53475-01
D1036C-A1 1" 1" NC 0 - 300 30 - 300 3.78 53475-01
D1047C-A1 1" 1-1/4" NC 0 - 300 30 - 300 3.78 53475-01
E1012H-A1 1/4" 1/4" NO 0 - 300 30 - 300 1.2 53473-05
E1013H-A1 1/4" 3/8" NO 0 - 300 30 - 300 1.2 53473-05
E1022C-A1 1/2" 1/4" NO 0 - 300 30 - 300 1.79 53474-03
E1023C-A1 1/2" 3/8" NO 0 - 300 30 - 300 1.79 53474-03
E1024C-A1 1/2" 1/2" NO 0 - 300 30 - 300 1.79 53474-03
E1025C-A1 1/2" 3/4" NO 0 - 300 30 - 300 1.79 53474-03
E1035C-A1 1" 3/4" NO 0 - 300 30 - 300 3.78 53475-01
E1036C-A1 1" 1" NO 0 - 300 30 - 300 3.78 53475-01
E1047C-A1 1" 1-1/4" NO 0 - 300 30 - 300 3.78 53475-01
3/2 (3 way) Multi-directional
C1012C-A1 1/2" 1/4" – 0 - 300 30 - 300 1.41 53474-03
C1013C-A1 1/2" 3/8" – 0 - 300 30 - 300 1.41 53474-03
C1014C-A1 1/2" 1/2" – 0 - 300 30 - 300 1.41 53474-03
C1025C-A1 1/2" 3/4" – 0 - 300 30 - 300 1.41 53474-03
C1035C-A1 1" 3/4" – 0 - 300 30 - 300 3.94 53475-01
C1036C-A1 1" 1" – 0 - 300 30 - 300 3.94 53475-01
C1037C-A1 1" 1-1/4" – 0 - 300 30 - 300 3.94 53475-01
C1048C-A1 2" 1-1/2" – 0 - 300 30 - 300 8.75 53822-01
C1049C-A1 2" 2" – 0 - 300 30 - 300 8.75 53822-01
4/2 (3 way twin)
G1023B-A4 1/2" 3/8" – 0 - 300 30 - 300 2.25 53474-06
G1024B-A4 1/2" 1/2" – 0 - 300 30 - 300 2.25 53474-06
G1025B-A4 1/2" 3/4" – 0 - 300 30 - 300 2.25 53474-06
G1035B-A4 1" 3/4" – 0 - 300 30 - 300 4.96 53475-06
G1036B-A4 1" 1" – 0 - 300 30 - 300 4.96 53475-06
G1037B-A4 1" 1-1/4" – 0 - 300 30 - 300 4.96 53475-06
4/2 (4 way)
F1012C-A1 1/4" 1/4" – 0 - 300 30 - 300 1.81 53473-05
F1013C-A1 1/4" 3/8" – 0 - 300 30 - 300 1.81 53473-05
F1023C-A1 1/2" 3/8" – 0 - 300 30 - 300 2.3 53474-06
F1024C-A1 1/2" 1/2" – 0 - 300 30 - 300 2.3 53474-06
F1025C-A1 1/2" 3/4" – 0 - 300 30 - 300 2.3 53474-06
F1035C-A1 1" 3/4" – 0 - 300 30 - 300 5.42 53475-06
F1036C-A1 1" 1" – 0 - 300 30 - 300 5.42 53475-06
F1037C-A1 1" 1-1/4" – 0 - 300 30 - 300 5.42 53475-06
* Pilot supply pressure must be equal to or greater than the operating pressure.
** Repair Kit: Kit contains all elastomers necessary to service one valve body.
Prospector Series Poppet Valves
1/4" to 2" Air Pilot Actuated
2/2, 3/2, & 4/2 Inline Valves
Single air pilot operated spring return inline valves
OUT
B
A
IN
OUT
B
A
IN

EXH IN
OUT
EXH IN
OUT

Normally Open
CYL 1IN
EXH CYL2
These models may
be used as
Distributor, Selector,
Normally Open or
Normally Closed.
CYL2 CYL1
IN EXH
13_ Poppets Air_Sol 4th_11_ Poppets 1/31/11 3:08 PM Page 189
VAL-190
VALVES
Norgren.com/usa – 303.794.2611 – help@amer.norgren.com
Prospector Series Poppet Valves
2/2, 3/2, & 4/2 Inline Valves
Port sizes (PTF standard: BSPP optional on most
sizes)
Exhaust
Inlet and on 3/2 Exhaust
Basic Cylinder Multi-directional on all other
Size Ports Models Models
1/4" 1/4" – 3/8"
3/8" – 3/8"
1/2" 1/4" 1/4" 3/8"
3/8" 3/8" 1/2"
1/2" 1/2" 3/4"
3/4" 3/4" 3/4"
1" 3/4" 3/4" 1"
1" 1" 1-1/4"
1-1/4" 1-1/4" 1-1/4"
2" 1-1/2" 1-1/2" 2"
2" 2" 2"
Port Identification
Each of the valve ports is identified with a cast or
stamped marking adjacent to the port.
Valve Materials
Main valve body, pistons, poppets, subbase: Aluminum
(treated to resist corrosion).
Standard solenoid operators: Zinc (treated to resist
corrosion), stainless steel, reinforced polyester, acetal,
copper wire.
Optional solenoid operators: Aluminum (treated to
resist corrosion), stainless steel, brass, acetal, copper
wire.
Manual & mechanical operators: Aluminum (treated to
resist corrosion) stainless steel, acetal, steel (treated to
resist corrosion).
Elastomers: Nitrile. Fluorocarbon is optional when
lubricants or impurities in the air system are
incompatible with Nitrile.
Fluids
Filtered and lubricated compressed air or vacuum.
Prospector poppet valves with A1, AA, or A4 air
operators or with C, D, F, or X series solenoid
operators may be used with filtered, non-lubricated
compressed air or vacuum, although tests indicate that
service life will be reduced. Valves with other operators
must not be used in non-lubricated service.
Seal Compatibility
Prospector poppet valve seals are compatible with
most good quality O-ring lubricants, including:
DC BR-2+ grease (Dow Corning)
DC 44 grease (Dow Corning)
Magnalube G (Saunders Industries)
Non-detergent mineral based oil such as Mobil DTE
light oil.
Poppet valve seals are not compatible with WD-40 or
commonly used deicer fluids. Consult factory to verify
compatibility of lubricants or fluids not listed above.
Valve Exhaust
The valve exhaust port must not be restricted with
anything more than a muffler or equal pipe size (most
exhaust ports are larger than the inlet port). Back
pressure on the exhaust side of the valve poppets can,
under some conditions, result in failure to operate. If
exhaust is to be piped away, piping should be installed
horizontally ar oat a downward angle from the valve to
provide drainage an minimize sludge formation.
Use of Speed Controls
Speed cnotrols may be installed in the exhuast port on
Norgren 3-port/2-position multi-direction popped
valves. Note: On all other poppet valves, speed controls
should only be installed in the air line between the
valve and the air-operated device and as close as
possible to the device.
Vacuum Service
Valves that can be used in vacuum service are
inentified by a “J” in the 6th position of the model
number.
For on-off application of vacuum, use a normally
closed 2-port/2-position (2-way) valve. Connect the
vacuum to the inlet port. When the valve is actuated,
vacuum will be applied to the outlet port.
For selecting alternay between vacuum and
pressure, use a normally open 3-port/2-position (3-say)
valve. Connect the vacuum to the exhaust port and
vent the inlet port. When the valve is actuated, vacuum
will be applied to the outlet port.
In addotopm. 4-port/2-position (4-way) valves can be
connected the same way as 3-port/2-position (3-way)
valves for selectin alternay between vacuum and
pressure or vacuum and vent. That is, connect the
vacuum to the exhuast port and pressure or vent to the
inlet port. When the valve is actuated, the cylinder
ports (outlets) will be alternay switched between
vacuum and pressure or vacuum and vent.
Representative response times @ 90 psig (6.2 bar)
inlet pressure
Time lapse between solenoid energized and initial rise
of outlet pressure
Operator Valve body
Basic 1/4" Basic 1/2" Basic 1"
4-way 3-way 3-way
C1 3.1 ms 34.9 ms 68.9 ms
CC 3.4 ms 15.2 ms 32.2 ms
CE 4.0 ms 21.0 ms 42.0 ms
CF 3.9 ms 38.3 ms 82.3 ms
Time lapsed between solenoid energized and outlet
pressure rise to 90% of inlet pressure
Operator Valve body
Basic 1/4" Basic 1/2" Basic 1"
4-way 3-way 3-way
C1 63.7 ms 40.8 ms 83.0 ms
CC 28.9 ms 19.0 ms 40.3 ms
CE 37.8 ms 25.1 ms 52.4 ms
CF 80.7 ms 45.8 ms 102.8 ms
13_ Poppets Air_Sol 4th_11_ Poppets 1/31/11 3:08 PM Page 190
VAL-191
VALVES
Norgren.com/usa – 303.794.2611 – help@amer.norgren.com
3/2 Inline Bodies
3.06 (77.7)
2.50 (63.5)
1.13 (28.7)
3/8", 3/8"
.53 (13.5)
2.69 (68.3)
.88 (22.4)
.53 (13.5) 1.56 (39.6)
3.00 (76.2)
3.56 (90.4)
.28 (7.1) TYP
.22 (5.6) Dia. (2 Plcs)
1/4", 3/8"
1/4", 3/8"
1.50(38.1)
3.00 (76.2)
3.06 (77.7)
1.56 (39.6)
3/8", 1/2", 3/4", 3/4"
1/4", 3/8", 1/2", 3/4"
3.89 (98.8( (Std))
4.15 (105.4) (Indicator)
1.03 (26.2)
1.03 (26.2)
1.94 (49.3)
2.75 (69.8)
2.31 (58.7)
2.00 (50.8)
1.00 (25.4)
.28 (7.1) Dia.(1 Plcs)
.87 (22.1)
1/4", 3/8", 1/2", 3/4"
2.00 (50.8)
4.00 (101.6)
4.06 (103.1)
2.06 (52.3)
3/4", 1",1-1/4" 1", 1-1/4", 1-1/4"
2.75 (69.9) 1.38 (34.9)
3.13 (79.5)
16.6 (156.6) (Std) 6.20 (157.5) (Indicator)
1.90 (48.3)
2.02 (51.3)
3.40 (86.4)
1.25 (31.8)
4.65 (118.1)
.41 (10.4) Dia. (2 Plcs)
3/4", 1", 1-1/4"
Basic 1/4-Inch Body D101*B & E101*B
(3-Port/2-Position Pilot Operated Valve)
Basic 1/2 - Inch Body D102*C & E102*C
(3/2 Pilot Operated Valve)
Basic 1 - Inch Body D103*C, D104*C, E103*C & E104*C
(3/2 Pilot Operated Valve)
INDICATOR PIN
OPTION
3.89 (98.8(Std))
.125 (3.2) Travel
6.16 (156.6) Std
6.20 (157.5) Indicator
.20 (5.1) Travel
INDICATOR PIN
OPTION
Prospector Series Poppet Valves
2/2, 3/2, & 4/2 Inline Valves
Dimensions in inches (mm)
13_ Poppets Air_Sol 4th_11_ Poppets 1/31/11 3:09 PM Page 191
VAL-192
VALVES
Norgren.com/usa – 303.794.2611 – help@amer.norgren.com
Basic 1/2 - Inch Body C101*C, C102*C, C105*C & C106*C
(3/2 Multi-Directional Pilot Operated Valve)
A
C
B
1.00 (25.4)
.28 (7.1)
Dia. (2 plcs)
2.13 (54.1)
1.44 (36.6)
3.20 (81.3)
1/4", 3/8", 1/2" Ports
1.66 (42.2)
.84 (21.3)
1.50 (38.1)
3.00 (76.2)
3.06 (77.7)
1.56 (39.6)
2.50 (63.5)
1.44 (36.6)
1/4", 3/8", 1/2", 3/4" 1/4", 3/8", 1/2", 3/4"
1/4", 3/8", 1/2", 3/4"
Basic 1 - Inch Body C103*C
(3/2 Multi-Directional Pilot Operated Valve)
Basic 2 - Inch Body C104*C & C108*C
(3/2 Multi-Directional Pilot Operated Valve)
3/2 Multi-Directional Inline Bodies
2.88 (73.2)
3.14 (79.8)
5.49 (139.4)
1.77 (45.0)
3.14 (79.8)
2.38 (60.5)
.16 (4.1)
4.62 (117.3)
2.31 (58.7)
3.31 (84.1)

留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7

联系我们

contact us

咨询电话

13636304209

扫一扫,关注我们

返回顶部